I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

rod blank
Posted by: Dale Rowsey (---.access.ntelos.net)
Date: March 27, 2006 03:49PM

HI all I need some help on a blank I am looking to make a live bait rod to be fished with minnows in a spinning blank .I am looking for a 7 ft. blank or so with a limber tip in a 2 pc. this rod will be used on trout, ring perch and bass I dont need anything to pricy Thanks for any help Dale

Options: ReplyQuote
Re: rod blank
Posted by: Ralph Ratliff (---.asm.bellsouth.net)
Date: March 27, 2006 04:11PM

I would take a look at FishSticks4U a sponsor. The web site is pretty good.

Hope this helps.

rhr

Options: ReplyQuote
Re: rod blank
Posted by: Jim Weiss (195.204.107.---)
Date: March 27, 2006 04:49PM

I have just discovered Rainshadow blanks. I've built a few casting rods from inexpensive fly blanks and they work well.

Options: ReplyQuote
Re: rod blank
Posted by: Cliff Hall (---.dialup.ufl.edu)
Date: March 27, 2006 05:39PM

For a TWO-Piece, 7-foot, LIMBER-tip Spinning rod,
to fish LIVE-MINNOWS for trout, ring perch & bass.
Not too pricey, ... consider: [www.fishsticks4u.com]

Batson RainShadow's Model #: ISP-84-2-F

Spin Multi-Purpose Blanks (IS / SP / ISP)
[www.fishsticks4u.com]

RainShadow “Spin” Multi-Purpose Blanks,
RX7-Graphite (43 million modulus)
ISP842F … Matte Clear … 7'0" … 2-piece …
6-10lb. … 1/16-5/16oz. … 0.350” … 4.5 / 64ths …
Mod-Fast … Lite … 1.45oz. … $54.00 – Add

RainShadow “Spin” Multi-Purpose Blanks,
RX7-Graphite (43 million modulus)
ISP842FG … Olive Green … 7'0" … 2-piece …
6-10lb. … 1/16-5/16oz. … 0.350” … 4.5 / 64ths …
Mod-Fast … Lite … 1.45oz. … $37.80 – Add
Listed on Close-Out at FishSticks4U.com (30% off $54).

Dale, if you can live with a ONE-PIECE Rod in a (6’6” or 7-ft) length, more options arise. These are rated (4-8) or (6-10)# Line, 1/16-5/16oz. Lures. Blank Wt. 1.5-2.0 oz.

ISB-78-0: RX7 MOD-FAST LITE $40
SB-78-0: RX6 MOD-FAST LITE $25

ISJ-78-1: RX7 FAST LITE $40
SJ-78-1: RX6 FAST LITE $30

SPG-78-1: E-GLASS MODERATE-action Xtra-Lite Power $9.20

Finish the project with some really nice Batson ForeCast Components: Y-frame, V-frame or Fly-frame single-foot guides; Reel Seats, Grips, etc.; and you’ll have a great rod at a great price from FS4U. Have fun. –Cliff Hall+++, Gainesville, FL-USA****

Options: ReplyQuote
Re: rod blank
Posted by: rick fulkerson (---.224.39.21.Dial1.Cincinnati1.Level3.net)
Date: March 28, 2006 12:44AM

hello,Dale
i've just got done building 2 of the rainshadow isp842f blanks. and I along with the men i built them for were very pleassed!

hope this helps,
rick

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster