SPONSORS
2024 ICRBE EXPO |
rod blank
Posted by:
Dale Rowsey
(---.access.ntelos.net)
Date: March 27, 2006 03:49PM
HI all I need some help on a blank I am looking to make a live bait rod to be fished with minnows in a spinning blank .I am looking for a 7 ft. blank or so with a limber tip in a 2 pc. this rod will be used on trout, ring perch and bass I dont need anything to pricy Thanks for any help Dale Re: rod blank
Posted by:
Ralph Ratliff
(---.asm.bellsouth.net)
Date: March 27, 2006 04:11PM
I would take a look at FishSticks4U a sponsor. The web site is pretty good.
Hope this helps. rhr Re: rod blank
Posted by:
Jim Weiss
(195.204.107.---)
Date: March 27, 2006 04:49PM
I have just discovered Rainshadow blanks. I've built a few casting rods from inexpensive fly blanks and they work well. Re: rod blank
Posted by:
Cliff Hall
(---.dialup.ufl.edu)
Date: March 27, 2006 05:39PM
For a TWO-Piece, 7-foot, LIMBER-tip Spinning rod,
to fish LIVE-MINNOWS for trout, ring perch & bass. Not too pricey, ... consider: [www.fishsticks4u.com] Batson RainShadow's Model #: ISP-84-2-F Spin Multi-Purpose Blanks (IS / SP / ISP) [www.fishsticks4u.com] RainShadow “Spin†Multi-Purpose Blanks, RX7-Graphite (43 million modulus) ISP842F … Matte Clear … 7'0" … 2-piece … 6-10lb. … 1/16-5/16oz. … 0.350†… 4.5 / 64ths … Mod-Fast … Lite … 1.45oz. … $54.00 – Add RainShadow “Spin†Multi-Purpose Blanks, RX7-Graphite (43 million modulus) ISP842FG … Olive Green … 7'0" … 2-piece … 6-10lb. … 1/16-5/16oz. … 0.350†… 4.5 / 64ths … Mod-Fast … Lite … 1.45oz. … $37.80 – Add Listed on Close-Out at FishSticks4U.com (30% off $54). Dale, if you can live with a ONE-PIECE Rod in a (6’6†or 7-ft) length, more options arise. These are rated (4-8) or (6-10)# Line, 1/16-5/16oz. Lures. Blank Wt. 1.5-2.0 oz. ISB-78-0: RX7 MOD-FAST LITE $40 SB-78-0: RX6 MOD-FAST LITE $25 ISJ-78-1: RX7 FAST LITE $40 SJ-78-1: RX6 FAST LITE $30 SPG-78-1: E-GLASS MODERATE-action Xtra-Lite Power $9.20 Finish the project with some really nice Batson ForeCast Components: Y-frame, V-frame or Fly-frame single-foot guides; Reel Seats, Grips, etc.; and you’ll have a great rod at a great price from FS4U. Have fun. –Cliff Hall+++, Gainesville, FL-USA**** Re: rod blank
Posted by:
rick fulkerson
(---.224.39.21.Dial1.Cincinnati1.Level3.net)
Date: March 28, 2006 12:44AM
hello,Dale
i've just got done building 2 of the rainshadow isp842f blanks. and I along with the men i built them for were very pleassed! hope this helps, rick Sorry, only registered users may post in this forum.
|