SPONSORS
2024 ICRBE EXPO |
Gold Winding Checks
Posted by:
Andrew Dickinson
(---.sub-70-209-59.myvzw.com)
Date: March 21, 2006 06:03PM
I'm building a fly rod using gold hardware. I just realized that I don't have a matching winding check to match the gold. I've only got Batson's Shiny Gunsmoke winding checks. Any ideas on some good alternatives?? Thanks!!
P.S. Winding Checks are a pain in the rear because of having to get just the right size. Do you guys have any good suggestions on how I can make my own checks to fit my blanks?? thanks Andrew Re: Gold Winding Checks
Posted by:
Fred Yarmolowicz
(---.hsd1.nj.comcast.net)
Date: March 21, 2006 06:30PM
I` ve heard of people using toe rings from Wal-Mart
but never did it myself Freddwhy (Rapt-Ryte) Re: Gold Winding Checks
Posted by:
Stan Grace
(---.hln-mt.client.bresnan.net)
Date: March 21, 2006 06:45PM
Angler's Workshop has gold anodized aluminum winding checks for one source. Stan Grace Helena, MT "Our best is none too good" Re: Gold Winding Checks
Posted by:
Ed Grella
(69.177.183.---)
Date: March 21, 2006 07:08PM
Merrick Tackle has gold, silver, blue, red, purple, black! Edited 1 time(s). Last edit at 03/22/2006 08:04PM by Ed Grella. Re: Gold Winding Checks
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: March 21, 2006 07:39PM
Some builders make them with epoxy Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Gold Winding Checks
Posted by:
Andrew Dickinson
(---.sub-70-209-59.myvzw.com)
Date: March 21, 2006 08:09PM
Thanks for the suggestions guys! I look into these sources! I think I remember from a previous posting on this message board that somebody had found a way to make winding checks out of pennies. I'm wondering if they can be made out of wood or hard plastic too. Any ideas??
Andrew Re: Gold Winding Checks
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: March 21, 2006 08:27PM
Anything you desire can be used if you wish. All up to your imagination.
Terry Henson likes to use 24kt gold chain as a winding check. A rubber "o" ring works, wood, bone, ivory, leather, If you fit the grip with a nice transition no check is needed at all. Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Gold Winding Checks
Posted by:
bill boettcher
(---.250.153.71.Dial1.Weehawken1.Level3.net)
Date: March 21, 2006 08:50PM
Unless a customer wants one they are only for looks. You can use any thing that you like the color of, can shape to fit. Soft metal ear rings and toe rings work fine. Wrap a few turns of gold metallic thread on. Do a nice guide wrap right up against the fore grip. Re: Gold Winding Checks
Posted by:
Cliff Hall
(---.dialup.ufl.edu)
Date: March 21, 2006 09:30PM
Rod-Bond sculpted epoxy ramp,
over-wrapped with gold metallic thread of your choice. -Cliff Hall+++ Re: Gold Winding Checks
Posted by:
Bill Worden
(---.dsl.scrm01.pacbell.net)
Date: March 22, 2006 12:37AM
I have made some out of wood, Liked them a lot. Re: Gold Winding Checks
Posted by:
Ross van Enckevort
(---.internode.on.net)
Date: March 22, 2006 04:04AM
Andrew,
I have the Fuji winding checks available Gold,Silver,Blue. You can check them out on my site. Cheers, Ross. Edited 1 time(s). Last edit at 03/22/2006 04:05AM by Ross van Enckevort. Re: Gold Winding Checks
Posted by:
Billy Vivona
(---.ny325.east.verizon.net)
Date: March 22, 2006 07:00AM
Ross, I wasn't aware you could get those components. I order them from Japan and have a @#$%& of a time paying with teh exchange rate.
[www.rodbuilding.org] Re: Gold Winding Checks
Posted by:
Rolly Beenen
(---.cpe.net.cable.roger)
Date: March 22, 2006 02:49PM
Ross
It would be a great idea to put a link to your site or at least name it. Beats the guessing game. Rolly Beenen Rovic Custom Rods Sorry, only registered users may post in this forum.
|