SPONSORS
2024 ICRBE EXPO |
Concept ring size question.
Posted by:
Matthew Sattazahn
(---.hfc.comcastbusiness.net)
Date: March 06, 2006 11:07AM
I just bought a Rainshadow IFT905G 7'6" flipping stick blank with the hopes of making it into a spinning rod for bass and redfish/snook fishing. I am planing on using Fuji Concept Alconlite guides. After looking into it, the smallest ring for the tip that will fit the blank is an 8 (8 ring/7 tube).
After the choke guide, i was hoping to go down to a size 6 ring. My thought being that if i am using 20 or 30 lb. braid, it would flow better through the small guides. Is my thought process off? I have seen very small ring guides in the past that have worked really well. I was planning on using this setup. 30-16-10-8-7-7-6-6-6 tip. But since i cant find the matching 6 ring tip, i am going to have to use 8 ring guides from the choke guide out. Does anyone have any input or helpful tips? Thanks for all the help. -Matt S. Re: Concept ring size question.
Posted by:
Steve Gardner
(---.dyn.sprint-hsd.net)
Date: March 06, 2006 01:04PM
Nothing say's you have to use 8 size guides if you use 8 size tip. It may look a little more uniform if you do, but that’s all. Just finished a flipping stick. I use 3-6’s and an 8 tip, because I would rather have the rod a little lighter and performing to what I want, instead of being locked into some cosmetic standard Re: Concept ring size question.
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: March 06, 2006 01:07PM
I'm with Steve,
I too go down to 6's and use an 8 ring if I have too on larger sticks. I never have iunderstood why the makers don't go down to AT LEAST 6's on everything tip top wise :( DR Re: Concept ring size question.
Posted by:
Tim Collins
(---.hsd1.mi.comcast.net)
Date: March 06, 2006 02:09PM
Forecast makes a BPLT06R07.0 (6mm ring - 7/64 tube) and a BPLT07R07.0 (7mm ring - 7/64 tube) but they are both black chrome. The smallest tube in the same style tops but in regular chrome is 6.5/64 (I assume it won't fit your tip). If you were to use black frames, I think you'd be hard press to tell the difference between the Fuji Alconite guides and a Forecast tip top. Re: Concept ring size question.
Posted by:
Matthew Sattazahn
(---.hfc.comcastbusiness.net)
Date: March 06, 2006 02:37PM
I didnt realize that Forecast made tip in that size.
Since I did buy the blank from FishSticks4U.com, and I was very pleased with the overall experience (and price!) of doing business with them, the least I could do is buy the guides from them too. ;) I will probably be using this rod in saltwater from time to time. I hope corrosion isnt a problem. Re: Concept ring size question.
Posted by:
Anonymous User
(Moderator)
Date: March 06, 2006 03:25PM
It will work fine. Also, please read the set-up instructions for the New Guide Coincept on the online library page here.
.............. Sorry, only registered users may post in this forum.
|