SPONSORS
2024 ICRBE EXPO |
Bumper guide
Posted by:
John Dow
(---.245.167.233.Dial1.Stamford1.Level3.net)
Date: March 05, 2006 09:48PM
What's Y'alls thoughts on using a Fuji TLSG10J as a bumper guide on an IMC 847 , 15lb braid , 2oz of weight. The other guides are #16 on the 0 axis and #12 on the 180 .
The line path looks fine , I'm just concerned if it may be a bit light , but there dosen't seem to be a ton of pressure on it when static testing . Thanks , John Got Fish ? Re: Bumper guide
Posted by:
Anonymous User
(Moderator)
Date: March 05, 2006 09:51PM
Should work. Any pressure should be straight in towards the blank so I'd think it'd be okay. If not, you have to replace one guide at some point down the road.
............... Re: Bumper guide
Posted by:
John Dow
(---.245.167.235.Dial1.Stamford1.Level3.net)
Date: March 06, 2006 07:06PM
Thanks Tom , I'll give it a try . Got Fish ? Sorry, only registered users may post in this forum.
|