I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

good source for spatulas
Posted by: Mike Applebee (---.ez-net.com)
Date: March 02, 2006 11:17PM

I was with my wife last weekend and we sere doing a little shopping at the mall. My wife wanted to stop at Bath and Beauty Works to get some of that antibacterial soap that comes in the funny shaped pump bottle. Incidentally, my Mom claims that that soap takes the smell of fish off your hands better than any other she's tried. Anyway, as I wasn't too interested in anything they sell, I was about to wait outside when I noticed all the different samples of lotions and soaps. Next to some of the samples were these small white appplicators that I immediately realized would work for finishing rods. I just tried it and they work great. I'm glad I grabbed a handful of them.

Options: ReplyQuote
Re: good source for spatulas
Posted by: Cliff Hall (---.dialup.ufl.edu)
Date: March 03, 2006 11:24AM

FYI - Also:
MUD HOLE CATALOG 2006. Page 96.
STOCK #: "SPATULA SET" = $16.

4-piece, metallic spatula set. One pie-shaped blade; one rounded tip; one short-tapered rectanglar tip; and one long rectanglar blade. All have straight edges. All are "in-line" with the handle, and "in-plane" and continuous with the rolled handle, and not "off-set". M-H says: "Great for applying finish or mixing epoxy. Just wipe clean, and use again."

Since I have several pharmacy / laboratory spatulas,
I have not tried these listed above. -Cliff Hall+++

Options: ReplyQuote
Re: good source for spatulas
Posted by: Mark Griffin (---.lsanca.dsl-w.verizon.net)
Date: March 05, 2006 10:54PM

We've got four piece sets for $8.99.

Mark Griffin
[]
C&M Custom Tackle
San Dimas, California

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster