SPONSORS
2024 ICRBE EXPO |
Extending a blank
Posted by:
Aaron Cavanaugh
(---.hsd1.mn.comcast.net)
Date: March 02, 2006 09:48PM
I've never tried this before, and I've got a customer wanting a G Loomis CB847 extended to 8 feet long.
Would it be foolish to try it for the first time on a client's rod? Is the process listed someplace? AC FishinFreaks Rogers, MN Re: Extending a blank
Posted by:
Anonymous User
(Moderator)
Date: March 02, 2006 10:04PM
An extensive article on how to do this properly was in a past issue of RodMaker. Really, a very comprehensive article on this technique which can really open up a new avenue for custom rod builders wishing to do more than just stick with factory actions and powers. Look for it in volume 6 #3.
.............. Re: Extending a blank
Posted by:
Aaron Cavanaugh
(---.hsd1.mn.comcast.net)
Date: March 02, 2006 10:27PM
Cool, Tom. Thanks. I think I actually have that one, but it's in storage, so I might have to order another one. We'll see if I can find mine. AC FishinFreaks Rogers, MN Re: Extending a blank
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: March 03, 2006 12:02AM
Here is a link to something you will want to check out
[www.rodbuilding.org] Thanks again Cliff Hall Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Extending a blank
Posted by:
Matt Davis
(---.prtel.com)
Date: March 03, 2006 08:16AM
Aaron
Feel free to drop me a line...I'd be happy to discuss... ................... Better to have and not need than to need and not have. Re: Extending a blank
Posted by:
bill boettcher
(---.250.57.93.Dial1.Weehawken1.Level3.net)
Date: March 03, 2006 08:55AM
There are blanks that are 7'10" long 1 Pc? Don't know if they are any good for your customer ?
Less to extend. Edited 1 time(s). Last edit at 03/05/2006 08:47AM by bill boettcher. Re: Extending a blank
Posted by:
Derek McMaster
(---.dsl.pltn13.pacbell.net)
Date: March 04, 2006 12:10PM
Not to hijack you thread but I am interested in this as well
I had a though of using a clear, hollow plexi rod with a removable buttcap so you can put a lightstick inside. I do a lot of night fishing. Derek Rohnert Park, CA Re: Extending a blank
Posted by:
Randy Parpart (Putter)
(---.propel.com)
Date: March 05, 2006 04:05PM
Wylie Wiggins had one he gave at the RodMaker reception on Saturday night in Charlotte. It had a laser in the butt shining up into the rod. With the laser on, the whole rod lit up. When the tip bent (FISH ON!!), the part of the rod bent did not light up... pretty darned cool!
I think Mark Crouse incorporated the switch into the butt of the handle so when the butt cap was turned, the laser turned off and on. This thing was REALLY neat! Putter Williston, ND Re: Extending a blank
Posted by:
bill boettcher
(---.nas32.newark2.nj.us.da.qwest.net)
Date: March 05, 2006 08:19PM
Now all we need is some one to make one that talks to ya, Hay Buddy, Ya Got A Fish ??? Sorry, only registered users may post in this forum.
|