I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

The National Rod Builders Show - Charlotte, NC
Posted by: Dan Metcalf (---.sttlwa.dsl-w.verizon.net)
Date: February 22, 2006 06:11PM

To all attendees, we formally invite you to come by our U-40 Rod Building Products booth. Ralph O'Quinn, Joe Kassuba and Dan Metcalf will be there to demonstrate application of LS Supreme, LS Supreme High Build, Rod Bond, Perma Gloss and other U-40 products. We will be there to answer your questions and have some fun.

Ralph O'Quinn will be doing two of the show's seminars, "Rod Repair" & "Making Multi-Piece Rods" and assisting Bill Stevens with "Grip Flocking". Come by for questions and good discussion.

You can purchase U-40 Rod Building Products at two booths:

Mud Hole Custom Tackle

Custom Tackle Supply

We look forward to seeing you there!!!

The folks at Trondak Inc U-40

Options: ReplyQuote
Re: The National Rod Builders Show - Charlotte, NC
Posted by: Edward D. Smith (---.ard.bellsouth.net)
Date: February 22, 2006 07:40PM

What about small paint cans to put Permagloss in. It has been stated that you can buy anything associated with rodbuilding in Charlotte. I bet no one has four ounce paint cans for Permaglosss. I guess they will tell me to go to Lowes and buy something cheap and dump it out and clean the can. Now I have found everything!

See y'all in Charlotte Sat.

Ed Smith

Options: ReplyQuote
Re: The National Rod Builders Show - Charlotte, NC
Posted by: Anonymous User (Moderator)
Date: February 22, 2006 07:53PM

I'll have some there. How many do you want? They'll be pint cans, however.

............

Options: ReplyQuote
Re: The National Rod Builders Show - Charlotte, NC
Posted by: Dan Metcalf (---.sttlwa.dsl-w.verizon.net)
Date: February 22, 2006 08:23PM

I will have a couple of cans for demo there. So come on by and see how easy it is to extend the self life of Permagloss. We could have a drawing for one of the demo cans.
See you at the Trondak booth.
Joe Kassuba

Options: ReplyQuote
Re: The National Rod Builders Show - Charlotte, NC
Posted by: Billy Vivona (---.ny325.east.verizon.net)
Date: February 23, 2006 06:39AM

Tom - I'd like a can or 2 - anything to prevent PG from setting up on me the way it has in teh past. I think being ale to use it will relieve me of a whole lot of issues I seem to run into.

I also think Putter will be doing a Marbling Demo at teh U-40 booth?

Options: ReplyQuote
Re: The National Rod Builders Show - Charlotte, NC
Posted by: Don Jones (204.180.144.---)
Date: February 23, 2006 09:54AM

Try House of Cans at houseofcans.com. Phone #847-677-2100.

Options: ReplyQuote
Re: The National Rod Builders Show - Charlotte, NC
Posted by: Edward D. Smith (---.ard.bellsouth.net)
Date: February 23, 2006 10:29AM

Thanks Tom, but a pint can is too big for me. I don't want that much air space over 4 oz. of PG. I'll be by the Trondak booth to get my name in the hat. By the time I order a dozen four oz. cans and pay the shipping, I'm better off buying one with paint and throwing the paint away. Maybe next year someone will showup with a case or two. Maybe Andy Dear will show up with a trash can full of 4 oz. paint cans. He'll sell anything that fits in a trash can.

See y'all Sat.

Ed Smith

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster