SPONSORS
2024 ICRBE EXPO |
DVD's?
Posted by:
Tony Papazian
(---.dsl.redshift.com)
Date: February 21, 2006 05:00PM
I just received a Cabela's Tackle Craft Catalog and noticed they have a few DVD's on rod building. Does anyone have an opinion on any of these or any other DVD's on the market? I already have Tom's book to get me started but I like seeing things happen instead of reading them.
Thanks. Tony Re: DVD's?
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: February 21, 2006 05:15PM
I would recommend Ken Preston's or Doc Ski's DVD's (both available from Mudhole and probably other sponsors on the left) Artie Hebert's tapes are pretty good also, although older, they are very helpful and well done. There are others but I'm familiar with these and would recommend them.
Mike Re: DVD's?
Posted by:
John Blair
(---.rgv.res.rr.com)
Date: February 21, 2006 05:17PM
Hello Tony,
I am building a library on rod building (for the grandkids to use) and find that there are several good DVD's out there. From the simple one by Roger of Flexcoat, Ken Preston's DVD's are great, Artie Herbert has a few out that are very useful. I find that even though I have been building rods for a while I learn something from each one. The most important thing is that when you learn several ways to do the same thing, you may find some usefulness from each technique. One of the most useful DVD's I have used is Andy Dear's on wood lathes. These DVD's are available from several of the vendors on the left of this site. Good luck. Big John Rio Hondo, Texas Blessed are those who can give without remembering and take without forgetting Re: DVD's?
Posted by:
John Blair
(---.rgv.res.rr.com)
Date: February 21, 2006 05:18PM
I am sorry I forgot Doc Ski's DVD. It will of great help to you. Big John Rio Hondo, Texas Blessed are those who can give without remembering and take without forgetting Re: DVD's?
Posted by:
Bill Stevens
(---.br.br.cox.net)
Date: February 21, 2006 08:07PM
Tony new idea. Check the directory at the top of this page and see if you can locate a builder within a reasonable distance. Contact him and tell him you would like to set up a visit. Most builders will do all they can to help you get started and you will make a friend for life. This one on one will save you a whale of a lot of time and watching someone work will increase you learning curve very fast.
Gon Fishn Re: DVD's?
Posted by:
Tony Papazian
(---.hsd1.ca.comcast.net)
Date: February 21, 2006 11:58PM
Bill,
I've already go something set up the first weekend in April to build my first rod with several experienced builders but I'm just trying to learn what I can before I go. Thanks, Tony Sorry, only registered users may post in this forum.
|