SPONSORS
2024 ICRBE EXPO |
J R Jones reelseat
Posted by:
Wayne T. Dye
(---.client.insightBB.com)
Date: February 15, 2006 08:51PM
Hello All
I am planning to build a 50/100 standup GUSA URS60MH-T. I want to put a J R Jones hoodless seat on it. They come in 3 sizes 20-22-24mm. My problem, I ordered a colored blank from Mudhole which set delivery back 3 weeks, now the blank won't be in untill after I leave next week for an extended trip out west, I'll return the first of April and will have about 4 weeks to build rod so really need to order seat before I leave. I talked to the people at J R Jones and they said they work closely with the people at GUSA and they would try to find out what size ID seat I need, they called and said they were trying but no does progress yet. My ??? does anyone have any any idea what size seat I will need to mount it about 14" up from the butt. Butt is .628, tip is sz.10, length is 6' I would really really appreciate any help you all can give. Thanks in advance. Wayne T. Dye Sixmile Creek Custom Rods Charlottesville IN P.S. Sorry I won't get to Charlotte this year I really enjoyed last year but BW and I should be pretty close to Tucson by then. A week or ten days going out 2 or 3 weeks in AZ. and then a week or ten days getting home. BOY do I LOVE this retirement stuff. Thanks again Wayne Re: J R Jones reelseat
Posted by:
Spencer Phipps
(---.hsd1.wa.comcast.net)
Date: February 15, 2006 09:13PM
Get the 20 mm. All the 20 mm reelseats are larger in ID than your blank's butt that I've used. Re: J R Jones reelseat
Posted by:
Wayne T. Dye
(---.client.insightBB.com)
Date: February 15, 2006 11:04PM
Spencer. Thanks for the answer. I guess if I were very smart I should have been able to to figure that out , but my math leaves a lot to be desired. I guess I could have used my calipers and put them on .628 and then changed thier setting to metric and saw that 20mm was larger .... if I were very smart. Sorry, only registered users may post in this forum.
|