SPONSORS
2024 ICRBE EXPO |
Sliding rings
Posted by:
Domenic Federico
(---.dsl.bcvloh.ameritech.net)
Date: February 14, 2006 11:24AM
Please point me in the right direction: I need sliding rings to add to my own turned ultra light cork grip/reelseat combo. It would also be great if the supplier had a recessed hood available too. I'm looking for the hardware only not the insert or as a kit with an insert.
Thanks, Domenic Federico Infinity Rod Creations defjam@core.com Re: Sliding rings
Posted by:
Don Davis
(199.173.224.---)
Date: February 14, 2006 11:47AM
Domenic, Rush River Rods has some aluminum slide rings not listed on their site. Very inexpensive. They have never made a recessed hood, though. I have never found a set like you describe. Cortland makes an aluminum cap and ring. Re: Sliding rings
Posted by:
Rob Matarazzo
(---.na.baesystems.com)
Date: February 14, 2006 04:06PM
Also try REC Components. Re: Sliding rings
Posted by:
Tom Danielson
(---.dtccom.net)
Date: February 14, 2006 09:38PM
On the left
Mudhole/grips/cork grips-tennessee handle 3 sizes hooded $.65 ea. They're listed with the handles butt sell separate I'd give them a call Re: Sliding rings
Posted by:
kenny cuddeford
(---.dhcp.scrm.ca.charter.com)
Date: February 14, 2006 10:40PM
i found the mudhole slip rings arre nice looking.i got the two smaller sizes and the small size fits a ultra light reel foot nice but the cork ends up having a very small od.the medium size is kind of too big for a ultra light reel foot.it is a tad loose.it does have a good size od on the cork..i ended up going with the metal ones after spending way too long on the first two attempts. Re: Sliding rings
Posted by:
Tom Danielson
(---.dtccom.net)
Date: February 14, 2006 10:44PM
and janns $2.65 hooded / aluminum or grahite Re: Sliding rings
Posted by:
Brian Lennen
(65.209.181.---)
Date: February 15, 2006 08:29AM
Tom Danielson Wrote:
------------------------------------------------------- > and janns $2.65 hooded / aluminum or grahite We're did you see them? I've looked all over their catalog for slip rings and can't find them. Re: Sliding rings
Posted by:
Domenic Federico
(---.dsl.bcvloh.ameritech.net)
Date: February 15, 2006 01:00PM
Thank you all for the assistance!
I checked out a few vendors and I am still searching for ones that I feel fit what I am constructing. Thanks, Domenic Federico Re: Sliding rings
Posted by:
Josh Martineau
(---.twcny.res.rr.com)
Date: February 15, 2006 04:07PM
Brian Lennen Wrote:
------------------------------------------------------- > Tom Danielson Wrote: > -------------------------------------------------- > ----- > > and janns $2.65 hooded / aluminum or grahite > > > > We're did you see them? I've looked all over > their catalog for slip rings and can't find > them. > [www.jannsnetcraft.com] Re: Sliding rings
Posted by:
Tom Danielson
(---.dtccom.net)
Date: February 15, 2006 08:19PM
Brian,
try Janns/rodbuilding/small ros building parts/slip rings its the the icon nearest the bottom on the right (last full row) let met know if you cant find them Re: Sliding rings
Posted by:
Ralph D. Jones
(---.bhm.bellsouth.net)
Date: February 17, 2006 12:59PM
Custom Tackle Supply has Struble nickel silver slip rings (fly) in silver & black. Nice rings. Ralph If at first you don't succeed, go fishing, then try, try again. Sorry, only registered users may post in this forum.
|