SPONSORS
2024 ICRBE EXPO |
Global Rods
Posted by:
Milton (Hank) Aldridge
(---.maine.res.rr.com)
Date: February 09, 2006 09:36AM
Hi All,
A couple of days ago I saw a post that mentioned Global Rods and now there is a picture of pens posted by Putter with a decal that says Global Rods. Can someone tell me what this Global Rods is? Thanks Hank On The Rocks Fishing Wells, ME. Re: Global Rods
Posted by:
Anonymous User
(Moderator)
Date: February 09, 2006 10:13AM
I'm sure one of the participants will chime in with more details. In a nutshell, several rod builders from around the country are each adding their own unique touch to a couple rods that are being prepared for display and raffle at the National Rod Show. I believe they will be displayed in the NERBS booth.
................... Re: Global Rods
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: February 09, 2006 10:25AM
Mike Joyce (NERBs member) originally thought this up and emailed about 13 people and we built two rods to raffle and use the monies for various things that promote rod building. Batson donated the blanks and guides. The builders supplied their own materials other than this and paid the shipping to the next person involved in the build.
The pens were some of the ones that I used to color coordinate the marbling that I did on one of the rods to see how these colors would look on the rod, Hank. Putter Williston, ND Re: Global Rods
Posted by:
Milton (Hank) Aldridge
(---.maine.res.rr.com)
Date: February 09, 2006 10:30AM
Ok, Thanks Tom & Putter. How can I get some of those raffle tickets. I'm unable to get to Charlotte but would like to purchase some tickets.
Hank Hank On The Rocks Fishing Wells, ME. Re: Global Rods
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: February 09, 2006 12:26PM
Email Billy Vivona or I'll buy what you want at Charlotte; I'm doing that for Doc, too. Putter Williston, ND Re: Global Rods
Posted by:
Milton (Hank) Aldridge
(---.maine.res.rr.com)
Date: February 09, 2006 12:29PM
Ok Thanks Putter - I'll contact you
Hank Hank On The Rocks Fishing Wells, ME. Re: Global Rods
Posted by:
Billy Vivona
(67.72.26.---)
Date: February 09, 2006 02:14PM
Sorry, I missed this post earlier.
You can send a check for Raffle tickets for the Global Rod to: Billy Vivona 609 Hunter Ave. Staten Islland, NY 10306 Each ticket cost $1. Re: Global Rods
Posted by:
Michael Joyce
(---.proxy.aol.com)
Date: February 09, 2006 03:33PM
Hank, I'm drilling wells in N.Hampton,NH tomorrow. How close is that to Wells? 1/2 hour? I could even show you the SW rod.
I expected that I'd only get enough positive responses for one "Global Rod", but just about everyone I asked said that they'd enjoy taking part in this. THE BUILDERS Steelhead Rod: Ray Jorgansen- wood inlayed split grip Mark Crouse- handle assembly, reel seat insert, decorative cross wrap (after the rod got snapped in two during a shipping incident. Mark was able to salvage the rear grip with great effort, and mount on a second blank, and second decorative wrap...three cheers for that effort!!) Guides and final finish. David Boyle- VisualWrap design of the decorative wrap Jim Upton - 360 weave ("Global Rods 2005" and a secret design) Dennis Papike - weave (Batson ent. Logo?...haven't seen it yet) Saltwater Spin: Andy Dear- walnut split grip and reelseat insert Mike McGiveney- rear decorative wrap Billy Vivona- fore decorative wrap Doc Ski- snook weave Randy "Putter"Parpart- marbled trim and decal Michael Joyce-Trim the marbled trim, guide wraps, finish Due to time constraints...Hiro Tanaka wasn't able to do the guide wraps on the steelhead rod...because I haven't completed the SW rod yet, I'll leave a guide open for him to wrap in Charlotte at the NERBS booth. Jim seems to think that he'd be willing to do it. Due to time constraints...John Dow was asked to come visit and do some kind of feather inlay , maybe alignment dots for the two pc....running out of time we decided the inlay could be done in the truck on the way to Charlotte. (16 hour drive) With a DC adapter...this could be the first feather inlay ever done at 75 mph! lol. I have to thank the participants for the amount of MANHOURS and talent they dedicated to this project, and Batson Enterprises for providing the blanks and components...Thank You. The rods will be on display at the Batson booth...though the SW rod will probablly have some final touches done to it saturday morning at the NERBS booth. 75% of the raffle proceeds will go towards providing books for libraries, with 25% going towards assisting rodbuilders that directly teach children and young adults, the art of rodbuilding....this raffle is a chance for all rodbuilders to "help" out, and be involved in this project. Mike Re: Global Rods
Posted by:
Milton (Hank) Aldridge
(---.maine.res.rr.com)
Date: February 09, 2006 06:25PM
Hi Mike,
I have sent you an email Hank Hank On The Rocks Fishing Wells, ME. Sorry, only registered users may post in this forum.
|