SPONSORS
2024 ICRBE EXPO |
Flex Coat
Posted by:
Jim Reed
(---.woh.res.rr.com)
Date: January 22, 2006 08:30AM
I have the quart size kit of flex coat and it is about 6 months old. The resin has seperated. Is this still good or should I just chuck it? If it is good how can I fix it? I tried shaking it up but that don't seem to work.
I just put finish on 2 rods this morning and it didn't seem right when mixing and now I know why. What I have left over in the mixing cup is still pretty soft and normally it is well on it's way to being set by now. Now the old cliche "WHY ME" Re: Flex Coat
Posted by:
Anonymous User
(Moderator)
Date: January 22, 2006 09:17AM
Take the resin and sit the bottle in a pan of very hot water for a half hour. Keep the water hot. The resin will return to normal, like new condition and all will be well.
.............. Re: Flex Coat
Posted by:
Jim Reed
(---.woh.res.rr.com)
Date: January 22, 2006 10:25AM
Thanks Tom!!
I also would like for you to email me the subscription rate for RobBuilder Magazine. I did not subscribe last year and I'm sure I lost a ton of info. Jim Re: Flex Coat
Posted by:
bill boettcher
(---.an3.nyc41.da.uu.net)
Date: January 22, 2006 10:47AM
Here it is [cinqo.pairowoodies.com] Sorry, only registered users may post in this forum.
|