I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Flex Coat
Posted by: Jim Reed (---.woh.res.rr.com)
Date: January 22, 2006 08:30AM

I have the quart size kit of flex coat and it is about 6 months old. The resin has seperated. Is this still good or should I just chuck it? If it is good how can I fix it? I tried shaking it up but that don't seem to work.

I just put finish on 2 rods this morning and it didn't seem right when mixing and now I know why. What I have left over in the mixing cup is still pretty soft and normally it is well on it's way to being set by now.

Now the old cliche "WHY ME"

Options: ReplyQuote
Re: Flex Coat
Posted by: Anonymous User (Moderator)
Date: January 22, 2006 09:17AM

Take the resin and sit the bottle in a pan of very hot water for a half hour. Keep the water hot. The resin will return to normal, like new condition and all will be well.

..............

Options: ReplyQuote
Re: Flex Coat
Posted by: Jim Reed (---.woh.res.rr.com)
Date: January 22, 2006 10:25AM

Thanks Tom!!

I also would like for you to email me the subscription rate for RobBuilder Magazine. I did not subscribe last year and I'm sure I lost a ton of info.

Jim

Options: ReplyQuote
Re: Flex Coat
Posted by: bill boettcher (---.an3.nyc41.da.uu.net)
Date: January 22, 2006 10:47AM


Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster