SPONSORS
2024 ICRBE EXPO |
Fish Decal
Posted by:
Steve Buchanan
(---.36.102.166.ip.alltel.net)
Date: January 18, 2006 06:59AM
I got some of those irredescent fish decals from Jann's Netcraft and am about to try to put one on a rod. All I got was the decal...no instructions. How do I do it ? Is this thing a peel & stick? Doesn't look like a waterslide....looks like a cloth backing....Does it need CP? Any special tricks I need to know? Thanks in advance..
Steve Buchanan Steve's Custom Rods Re: Fish Decal
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: January 18, 2006 08:48AM
Most likely, it's 3 layers. Remove the first (Bottom) layer, burnish to the area. Then remove the clear top layer. I'd recommend using CP or a fixative over the top of this type decal. I've had a few lift or curl on me when applying finish to them. Putter Williston, ND Re: Fish Decal
Posted by:
Jay Lancaster
(12.174.138.---)
Date: January 18, 2006 10:40AM
Yes peel & stick. As Putter already said, you take the backing off first. Place the sticker in the desired area and burnish on. Put it where you want it to begin with...these things stick tight. After burnishing well you peel the top clear layer off leaving only the decal on the blank. The normal recomendation is to use a blow dryer to finish the seal. Luckily I've never had epoxy lift one from the blank.
Jay Re: Fish Decal
Posted by:
Steve Buchanan
(---.36.102.166.ip.alltel.net)
Date: January 18, 2006 11:26AM
Thanks guys....I think I can do it now....I love this Forum....What would we do without it? Re: Fish Decal
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: January 18, 2006 11:32AM
I think some would curl up in the fetal position and suck their thumb... LOL!!! Putter Williston, ND Re: Fish Decal
Posted by:
Jay Lancaster
(12.174.138.---)
Date: January 18, 2006 02:38PM
Hey...I resemble that remark! LOL
Jay Sorry, only registered users may post in this forum.
|