I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

spacing guided needed
Posted by: daniel minsker (---.satsop-1.reachoneinternet.net)
Date: January 18, 2006 03:30AM

i purchased an 8 foot lightwieght spinning fiberglass rod and was wondering if anyone had a spacing guide for the old concept as for i am a beginner all reply's greatly respected thanks dan

Options: ReplyQuote
Re: spacing guided needed
Posted by: bill boettcher (4.250.45.---)
Date: January 18, 2006 08:47AM

easy thing to do is go to St Croix's site. Find the same blank if you can. Set them up to there spacing.
Then go to the Library page and check out the articles

[www.rodbuilding.org]

[www.rodbuilding.org]

Options: ReplyQuote
Re: spacing guided needed
Posted by: Mike Barkley (---.nap.wideopenwest.com)
Date: January 18, 2006 11:12AM

What is the "OLD" concept spacing??
Mike

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster