I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Need Help with Blank and Guides
Posted by: Scott Parsons (205.244.119.---)
Date: January 16, 2006 07:40AM

I just got done doing my first show. Overall I am pleased with the way things turned out. I got an order for a rod. The gentlemen wants to use 10 lb spectra line on a spinning reel, wants a 2 piece rod not more then 5' 6" long. What type of blank can you guys recommend. and also what type of guides because I have heard with the specta you need to be careful on the guide selection. As always thank you in advance for your help. Scott

Options: ReplyQuote
Re: Need Help with Blank and Guides
Posted by: Spencer Phipps (---.lsil.com)
Date: January 16, 2006 09:11AM

Spectra line doesn't hurt guides in anyway. It's the sand and dirt people get in the spectra fibers that acts like an abrasive. I usually boat fish with spectra and even when bank fishing try not the put my rod and reels in the water or dirt as much as I can. Have never had a guide damaged in the last 12 years or so that I've been using the stuff.

Options: ReplyQuote
Re: Need Help with Blank and Guides
Posted by: Spencer Phipps (---.lsil.com)
Date: January 16, 2006 09:13AM

Scott,
You didn't mention what the gentleman wants the rod for. Is this an ultralite?

Options: ReplyQuote
Re: Need Help with Blank and Guides
Posted by: Scott Parsons (205.244.119.---)
Date: January 16, 2006 10:08AM

Yes this is an ultralite. Thanks

Options: ReplyQuote
Re: Lets just hope...
Posted by: Chuck McIntyre (---.hlrn.qwest.net)
Date: January 16, 2006 11:28AM

He remembers to set his drag to the blank capabilities,and not the breaking strength of the line. Might be a potential problem down the road to consider...... FWIW
Chuck

Options: ReplyQuote
Re: Lets just hope...
Posted by: bill boettcher (---.nj-01.cvx.algx.net)
Date: January 16, 2006 12:05PM

First places I usually look are St Croix and Rainshadow/Forecast

Options: ReplyQuote
Re: Need Help with Blank and Guides
Posted by: stan mclean (---.lndnnh.adelphia.n)
Date: January 16, 2006 01:21PM

depending on how much he wants to spend, i would go with a 3series st. croix. and fuji alconites. ggood luck

Options: ReplyQuote
Re: Need Help with Blank and Guides
Posted by: Cliff Hall (---.dialup.ufl.edu)
Date: January 18, 2006 03:01AM

Why does he want a 2-pc for a UL or L power rod?

Does he have a luggage / airline limitation? (1/2 of 5'6" = ~ 34")

Could use a 3-pc rod that is longer than 5'6" (66") ?

If he wants a 10# rod rating, that's a little tricky.
Consider a FAST action 2-pc 6'0" ~10# rod,
and then do all the shortening from the butt end
to get down to a 5'6" length overall assembled.
St. Croix Model #: PS-6'0"-ML-Fast-2pc 4-10# line

If he wants a really LITE or ULTRA-LITE 2-pc rod ~5'6",
then these rod blanks may suit his needs:

RAINSHADOW IS-66"-1-F(ferruled = 2-pc) RX7 Graphite 2-6# line
~$26 Close-Out. ... [www.fishsticks4u.com]

FORECAST SP-66"-1-2(2-pc) RX6 Graphite 2-6# line 1/16-1/4 oz

ST.CROIX PS-5'6"-UL-F-2 SC-II Graphite 2-6# line

Good Luck, -Cliff Hall+++



Edited 1 time(s). Last edit at 01/18/2006 01:20PM by Cliff Hall.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster