I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by: Bob Francesconi (---.proxy.aol.com)
Date: January 15, 2006 05:58PM

specifically, Fuji CLCSG 16m and 12m. According to Fuji, they're new and have been available since April '05. Fuji's N. American distributor has no plans to bring them in. One of our sponsors used to advertise that they could get any guide that Fuji made but for the life of me I can't find them now. Appreciate any help, even the name of a foreign supplier.
-Bob
lawew@aol.com

Options: ReplyQuote
Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by: Mark Griffin (---.lsanca.dsl-w.verizon.net)
Date: January 15, 2006 07:17PM

Bob,

I stock the BLCAG's, BUT, show the CLCSG's in my '06 price sheet. Let me make a call for you tomorrow and I'll mail you back.

Mark Griffin
[]
C&M Custom Tackle
San Dimas, California

Options: ReplyQuote
Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by: Spencer Phipps (---.lsil.com)
Date: January 15, 2006 07:34PM

I think that was an old sponsor. The Alabama one that was bought out at the last minute before closing.

Options: ReplyQuote
Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by: Bob Francesconi (---.proxy.aol.com)
Date: January 15, 2006 07:34PM

Mark, thanks for checking. The sizes I need are 16m and 12m. These are high frame versions of Fuji's regular 16 and 12 sizes. They have obviously discovered the gaping hole in their LC frame line up. The only problem for us is that they are not available in North America via their normal distribution chain. Thanks again.
Bob

Spencer, thanks for the info. Now I can stop chasing my tail over that lead.



Edited 1 time(s). Last edit at 01/15/2006 07:56PM by Bob Francesconi.

Options: ReplyQuote
Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by: Mark Griffin (---.lsanca.dsl-w.verizon.net)
Date: January 16, 2006 01:22PM

Bob,

Check your email. You're good to go...

Mark Griffin
[]
C&M Custom Tackle
San Dimas, California

Options: ReplyQuote
Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by: Bob Francesconi (---.proxy.aol.com)
Date: January 17, 2006 01:54PM

I'm still on the hunt for these guides. Will post if I have any success but its starting to look like I'll just use high frame hardloy and save myself $40 or so.

Options: ReplyQuote
Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by: toejam (---.hsv.bellsouth.net)
Date: February 22, 2006 06:14PM

www.japantackle.com

Options: ReplyQuote
Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by: W T McLennan (---.hsv.bellsouth.net)
Date: February 22, 2006 06:21PM

www.japantackle.com

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster