SPONSORS
2024 ICRBE EXPO |
Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by:
Bob Francesconi
(---.proxy.aol.com)
Date: January 15, 2006 05:58PM
specifically, Fuji CLCSG 16m and 12m. According to Fuji, they're new and have been available since April '05. Fuji's N. American distributor has no plans to bring them in. One of our sponsors used to advertise that they could get any guide that Fuji made but for the life of me I can't find them now. Appreciate any help, even the name of a foreign supplier.
-Bob lawew@aol.com Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by:
Mark Griffin
(---.lsanca.dsl-w.verizon.net)
Date: January 15, 2006 07:17PM
Bob,
I stock the BLCAG's, BUT, show the CLCSG's in my '06 price sheet. Let me make a call for you tomorrow and I'll mail you back. Mark Griffin [] C&M Custom Tackle San Dimas, California Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by:
Spencer Phipps
(---.lsil.com)
Date: January 15, 2006 07:34PM
I think that was an old sponsor. The Alabama one that was bought out at the last minute before closing. Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by:
Bob Francesconi
(---.proxy.aol.com)
Date: January 15, 2006 07:34PM
Mark, thanks for checking. The sizes I need are 16m and 12m. These are high frame versions of Fuji's regular 16 and 12 sizes. They have obviously discovered the gaping hole in their LC frame line up. The only problem for us is that they are not available in North America via their normal distribution chain. Thanks again.
Bob Spencer, thanks for the info. Now I can stop chasing my tail over that lead. Edited 1 time(s). Last edit at 01/15/2006 07:56PM by Bob Francesconi. Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by:
Mark Griffin
(---.lsanca.dsl-w.verizon.net)
Date: January 16, 2006 01:22PM Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by:
Bob Francesconi
(---.proxy.aol.com)
Date: January 17, 2006 01:54PM
I'm still on the hunt for these guides. Will post if I have any success but its starting to look like I'll just use high frame hardloy and save myself $40 or so. Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by:
toejam
(---.hsv.bellsouth.net)
Date: February 22, 2006 06:14PM
www.japantackle.com Re: Need source for Fuji LC ,lowriders size 16m and 12m...
Posted by:
W T McLennan
(---.hsv.bellsouth.net)
Date: February 22, 2006 06:21PM
www.japantackle.com Sorry, only registered users may post in this forum.
|