SPONSORS
2024 ICRBE EXPO |
Blank for a reamer
Posted by:
Robert Miller
(---.hsd1.wa.comcast.net)
Date: January 08, 2006 12:23PM
I want to buy a cheap $10 blank just to cut up and make a reamer out of. Can anyone suggest a certain one, I cant find any....preferably solid fiberglass. I dont have a store withing 200 miles. Re: Blank for a reamer
Posted by:
Ken Preston
(---.longhl01.md.comcast.net)
Date: January 08, 2006 12:25PM
Jann's Netcraft (left) has solid glass blanks that you can sacrifice. Re: Blank for a reamer
Posted by:
Robert Miller
(---.hsd1.wa.comcast.net)
Date: January 08, 2006 05:19PM
Perfect!!!! Thanks for the great info Ken Re: Blank for a reamer
Posted by:
bill boettcher
(---.250.57.197.Dial1.Weehawken1.Level3.net)
Date: January 09, 2006 09:19AM
Ken
Are there solid glass blanks --straight ?? The last ones I got were bent - bad ? Re: Blank for a reamer
Posted by:
Ken Preston
(---.longhl01.md.comcast.net)
Date: January 09, 2006 05:36PM
Since the blank is going to be cut up - really doesn't matter. Lamiglas and Batson ( I think ) still have solid glass as does Merrick Tackle. Jann's is quick/easy (no license / buy direct) and you can buy in 1 or 5 'lots' . So, I pointed to Jann's Re: Blank for a reamer
Posted by:
bill boettcher
(---.250.57.36.Dial1.Weehawken1.Level3.net)
Date: January 09, 2006 11:33PM
I know that but Batson's white blanks are not streight ?? Bent bad?? Sorry, only registered users may post in this forum.
|