SPONSORS
2024 ICRBE EXPO |
Fuji Guides
Posted by:
Richard O'Mara
(---.lax.untd.com)
Date: January 04, 2006 08:44PM
I am looking for a site that has most Fuji rod guides. What I am looking for is rod layouts , plus height of guide (specification
Re: Fuji Guides
Posted by:
bob Tursi
(---.dyn.optonline.net)
Date: January 04, 2006 08:49PM
Look in the left column ....go to anglers research / Fuji thats the most info you will get on Fuji guides, that I know of . maybe someone else has a link . Re: Fuji Guides
Posted by:
Anonymous User
(Moderator)
Date: January 04, 2006 08:49PM
Anglers Resources will have photos of most of the Fuji guides available here in the U.S. Heights and other specifics will be hard to come by, however.
Fuji also has an company site out of Japan. I must confess that I don't have the URL for it at this time. .......... Re: Fuji Guides
Posted by:
Cliff Hall
(---.dialup.ufl.edu)
Date: January 04, 2006 09:06PM
FUJI RING HEIGHTS:
[www.fujitackle.com] [Courtesy of Alexander Chunikhin] FUJI RING OD-ID-Width: from the drop-down menu link GENERAL INFORMATION “RING SIZE CHART†[www.anglersresource.net] FUJI GUIDE LAYOUT: from the drop-down menu link GENERAL INFORMATION “GUIDE PLACEMENT CHART†[www.anglersresource.net] FUJI CATALOG, hard-copy available at: from the drop-down menu link GENERAL INFORMATION “CATALOG REQUEST†[www.anglersresource.net] Edited 1 time(s). Last edit at 01/04/2006 11:38PM by Cliff Hall. Re: Fuji Guides
Posted by:
Spencer Phipps
(---.mo-stlouis0.sa.earthlink.net)
Date: January 04, 2006 10:38PM
Rich,
If your looking for the recommendations for guide sizes and placement on the Fuji site, I wouldn't use them if you want the best performing rod. The Library above has the Concept guide primer and the static guide placement articles you want to use instead. You'll end up with a lighter, nicer rod that way. Re: Fuji Guides
Posted by:
Richard O'Mara
(---.lax.untd.com)
Date: January 05, 2006 08:08AM
What I am looking for is the Frame "height", from base to top of guide...overall height of guides...thanks for the info... Re: Fuji Guides
Posted by:
Cliff Hall
(---.dialup.ufl.edu)
Date: January 05, 2006 11:58AM
Rich O'Mara : This is the info you want to down-load to your hard-drive. For practical purposes, consider any of the Fuji Y-frame or Vee-frame guides of whatever frame metal (or color) or ceramic ring material to have the same HEIGHT OFF THE BLANK as its analogous counterpart in another series of Fuji guides. The RING OD-ID-Widths will vary slightly with ceramic material for a given ring-flange type, but not much. A "Table of Guide Masses (Weights)" is unknown to me, which is why a nice top-loading scale (+/- 10 mg) is on my Wish List. -Cliff Hall+++
FUJI RING HEIGHTS: [www.fujitackle.com] FUJI RING OD-ID-Width: from the drop-down menu link GENERAL INFORMATION “RING SIZE CHART†[www.anglersresource.net] Re: Fuji Guides
Posted by:
Richard O'Mara
(---.lax.untd.com)
Date: January 05, 2006 12:51PM
Thanks Ken, and everyone that helped...just what I was looking for. Sorry, only registered users may post in this forum.
|