SPONSORS
2024 ICRBE EXPO |
Help - SCII blank diameter
Posted by:
Matt Davis
(66.228.246.---)
Date: January 01, 2006 11:04AM
I've got a blank that got back ordered and my time frame for getting the rod done is getting short. I'd like to get to work on the grip. Does anyone have a St. Croix 2S66MF that they could measure for me? I'm looking for the blank diameter 13" up from the butt of the blank.
Thanks in advance! Better to have and not need than to need and not have. Re: Help - SCII blank diameter
Posted by:
Spencer Phipps
(---.lsil.com)
Date: January 01, 2006 12:28PM
On an old rod I built er.... never mind, it looks to be .491 at as close to 13 inches as the wraps will let me get. Re: Help - SCII blank diameter
Posted by:
Buzz Butters
(---.dotnet.com)
Date: January 01, 2006 01:27PM
Matt,
I have that blank in the shop still in the bag. I will measure it and email you on Monday when I get back to work. Will that be soon enough? Buzz Re: Help - SCII blank diameter
Posted by:
Matt Davis
(66.228.246.---)
Date: January 01, 2006 01:37PM
Spencer - Thanks for the measurement!
Buzz - Thanks for the offer but Spencer's measurement is good enough for me to get my cork on the right sized mandrel. I appreciate the assistance guys! Better to have and not need than to need and not have. Sorry, only registered users may post in this forum.
|