SPONSORS
2024 ICRBE EXPO |
Applying Apoxy - If you think that.....
Posted by:
Tom Danielson
(---.dtccom.net)
Date: December 23, 2005 04:31PM
(1) those little tiny frayed ends that didnt get tucked in properly will lay down when you apply your apoxy, be sure they will stand up like whiskers in shaving creme.
(2) you misread the syringe - top of the plunger for the resin- bottom for the hardener (1//2cc) - you probably did! (3) ..the apoxy is setting up too fast - it is! (4) your wife had a hot flash and turned the heater down from 80 deg's to 65deg's and your poorly measured apoxy is now really settin up too fast - bet it is! (5) because of (1) thru (4) all is lost - lets just say - there isnt much margin for any more mistakes. All came out well but the next one will be better. Lessons Learned: McDonalds plastic mixers are great. Sorry, only registered users may post in this forum.
|