I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Can't find the ccs data!
Posted by: Brian Stewart (---.dial.redwing.net)
Date: December 15, 2005 05:27PM

Hey folks,

In my last post someone mentioned a common cents data page that had a bunch of rods rated on it. I tried the 2 links at the upper left of this site, but could not find the page with all the rod data on it. Is this somewhere else? Am I not looking hard enough? Is it something I have to pay for, or sign up for? Any help would be appreciated. Thanks.

Brian

Options: ReplyQuote
Re: Can't find the ccs data!
Posted by: Randy Parpart (Putter) (---.nccray.com)
Date: December 15, 2005 05:43PM

It's free. Just click on CCS Data Site, then on that page, right at the top in the middle black box, Common Cents Rod Data, click on it and that'll get you there.

Putter
Williston, ND

Options: ReplyQuote
Re: Can't find the ccs data!
Posted by: Jim Benenson (164.64.146.---)
Date: December 15, 2005 06:22PM

The URL of the data page is www.superbob.org/CC_Data.htm Make sure that you use the correct tab on the bottom of the page for your category.

Jim.

Options: ReplyQuote
Re: Can't find the ccs data!
Posted by: Stan Grace (---.hln-mt.client.bresnan.net)
Date: December 15, 2005 07:11PM

When you open the CCS data site you need to wait for a moment to allow the range of choices to appear just below the heading, " CCS Data Site".

Stan Grace
Helena, MT
"Our best is none too good"

Options: ReplyQuote
Re: Can't find the ccs data!
Posted by: Brian Stewart (---.dial.redwing.net)
Date: December 15, 2005 07:29PM

Thanks for the info. For some reason the links aren't loading. I viewed the source code and found the link there. Good info on the data page. Pretty enlightening.

I think I'm going to have a really hard time finding a 2 or 3 wt over 8 ft that I will like!

Brian

Options: ReplyQuote
Re: Can't find the ccs data!
Posted by: bill boettcher (---.an2.nyc41.da.uu.net)
Date: December 17, 2005 12:12AM

Check out the Dan Craft blanks

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster