SPONSORS
2024 ICRBE EXPO |
Injecting glue
Posted by:
Owen Nuttridge
(---.wa.bigpond.net.au)
Date: December 06, 2005 02:35AM
Can anyone advise what type of syringe I can use to inject some araldite into a squeaky cork grip. (or an alternative method)
Thanks Owen Re: Injecting glue
Posted by:
Anonymous User
(203.212.152.---)
Date: December 06, 2005 06:45AM
Owen if no one else replies wtih some suggestions email me and I might be able to help you with a few ideas.
bearclawrods@iprimus.com.au Re: Injecting glue
Posted by:
Mud Hole Custom Tackle
(---.233.204.68.cfl.res.rr.com)
Date: December 06, 2005 08:05AM
These work great:
[shop.mudhole.com] Regards. Team Mud Hole Custom Tackle Web: [www.mudhole.com] Email: sales@mudhole.com Toll Free Phone #: 1-866-790-RODS (7637) Stay Connected with us: FaceBook: [www.facebook.com] YouTube: [www.youtube.com] Instagram: [www.instagram.com] Tik Tok: Tik Tok: [www.tiktok.com] Twitter: @mudholetackle Re: Injecting glue
Posted by:
Anonymous User
(Moderator)
Date: December 06, 2005 08:56AM
Monoject or similar found at most hobby shops will work fine. I'm not sure what Mud Hole has there, you might want to take a look.
......... Re: Injecting glue
Posted by:
Joshua Markvan
(208.165.251.---)
Date: December 06, 2005 10:58AM
I know nothing about ARALDITE or MONOJECT. Can one of you tell me a little about either of these? I've injected thinned Titebond III in the past, also CA+ glue, and I think thinned rodbuilders epoxy. Josh Markvan www.markvanheirloom.com Re: Injecting glue
Posted by:
Ralph D. Jones
(---.bhm.bellsouth.net)
Date: December 06, 2005 12:09PM
Owen, find a woodworking supply store. They have epoxy syringes to inject epoxy into chair & furniture joints for repairs. If there is no such store in your area, call for a "Woodcraft" catalog at 1-800-225-1153. Good luck. Merry Christmas. Ralph If at first you don't succeed, go fishing, then try, try again. Sorry, only registered users may post in this forum.
|