I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Reversing Chevrons
Posted by: Robert Sladek (---.dsl.irvnca.pacbell.net)
Date: November 16, 2005 11:02PM

Hello everyone, I have just started getting into rod building, and just finished my first one. I have purchased a PacBay RW3L power wrapper. I have purchased the Doc Ski, Arte Hebert, & Flexcoat DVD's. I have also just purchased Advanced Custom Rod Building, and Advanced Thread Art by Dale P. Clemens. My question is where can I find instructions on making a reversing chevron. I have seen some pics of them, and have done some test chevron wraps, but would like to learn how to do a reversed chevron.
Any info would be greatly appreciated. Robert

Options: ReplyQuote
Re: Reversing Chevrons
Posted by: Nathan Brock (---.mkethn01.fl.comcast.net)
Date: November 17, 2005 01:28AM

Page 97 in Custom Rod Thread Art.

Nathan

Options: ReplyQuote
Re: Reversing Chevrons
Posted by: Scott VanGuilder (162.96.169.---)
Date: November 17, 2005 01:39PM

Check out this page there is an actual little movie that shows how it is wrapped.

[www.visualwrap.com]

Scott

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster