SPONSORS
2024 ICRBE EXPO |
chuck supplier needed
Posted by:
Ken Finch
(---.bna.bellsouth.net)
Date: November 10, 2005 01:19PM
Was going to order the PSI Barracuda chuck for a new lathe I got today but they told me it wouldn't be available for about another month. I can't wait that long!! I'm excited and want to start work now!!
Can anyone recommend another place that sells a comparable self centering chuck? I'd like to stay in the $100 range if at all possible. Re: chuck supplier needed
Posted by:
Michael Sledden
(208.21.98.---)
Date: November 10, 2005 02:43PM
PSI did have others that they were selling at a discount. One other place would be Woodcraft. They have a Nova chuck that is on sale for $99.99 right now online. Re: chuck supplier needed
Posted by:
Steven Libby
(---.hsd1.ma.comcast.net)
Date: November 10, 2005 04:41PM
I just received this one from PSI today for $44.95 ($51.90 after shipping) as I wanted a backup. I'm not recommending or even suggesting it to you, just putting it out there in case you didnt see it on their site.
[www.pennstateind.com] New Utility Grip™ 4-Jaw Lathe Chuck— includes 2 sets of Jaws Our newest self-centering utility chuck is ideal for mini, midi, or even full size lathes. Hold bowl blanks or spindles from the inside or outside with the included #1 and #2 jaws. A screw chuck (not shown) is also included as an added bonus. • #2 jaws expands from 2" to 3-3/4" dia. to grab inside. Grips from 1-5/8" to 3-1/2" dia. from the outside. • #1 jaws expend from 13/16" to 2-7/8" diameter to grab inside. Grips from 1/2" to 2-1/8" diameter, from the outside. •Includes adapters for 3/4" x 16tpi (Carbatec) and 1" x 8tpi (Jet, Delta Midi Lathe). Weight is 5lbs. Re: chuck supplier needed
Posted by:
Ken Finch
(---.bna.bellsouth.net)
Date: November 10, 2005 05:00PM
Thanks. I found Woodcraft and have ordered the Nova chuck. Looks like a nice unit. Thanks! Re: chuck supplier needed
Posted by:
Ken Finch
(---.bna.bellsouth.net)
Date: November 11, 2005 09:20AM
Now I think I didn't order the right jaws. What do I need to chuck mandrels. Spigot jaws?? Re: chuck supplier needed
Posted by:
Stan Grace
(---.hln-mt.client.bresnan.net)
Date: November 11, 2005 10:38AM
A 3 jaw self-centering mini chuck sold by Penn State works well on mandrels. Stan Grace Helena, MT "Our best is none too good" Sorry, only registered users may post in this forum.
|