SPONSORS
2024 ICRBE EXPO |
Where can I get...
Posted by:
martin Ferral
(---.fuse.net)
Date: November 03, 2005 05:00PM
I need butt sections from blanks that are between 2' and 3' in length and 3/4" - 1" in dia. I am going to use these to build special devices that will be used by Martial Arts students. If anyone has some or knows where I could get short pieces without having to buy and chop an entire blank please let me know. Color doesn't matter. I'll pay for the pieces and shipping ofcourse. Please email me if you can help. Thanks! Re: Where can I get...
Posted by:
Dan Hogan
(---.lsanca54.dynamic.covad.net)
Date: November 03, 2005 05:14PM
Rather than spending money on Rod blanks. Take a look at the fiberglass extension handles sold by
Home Depot or Lowe's. You shoulbe able to get several out of one handle, about $10.00 for about a ten footer. Dan Hogan The only way to have a friend, is to be one. Re: Where can I get...
Posted by:
martin Ferral
(---.fuse.net)
Date: November 03, 2005 05:57PM
I need the taper that the butt sections will have. Thanks. Re: Where can I get...
Posted by:
Mike Crichton
(---.abhsia.telus.net)
Date: November 03, 2005 11:21PM
Martin,
Try contacting any of the rod blank manufacturers on this board & ask them for any suitably dimensioned (per your requirements) reject blank sections they might have. You might find what you need that way. doesn't hurt to ask. Good Luck. Re: Where can I get...
Posted by:
William Bartlett
(---.proxy.aol.com)
Date: November 03, 2005 11:45PM
Martin,
Check your email Bill in WV Re: Where can I get...
Posted by:
Neal Cissel
(---.phnx.qwest.net)
Date: November 04, 2005 05:55PM
We at Neal's Fishing Products have a lot of short blank sections for sale and unheard of pricing. Just email me the diameter you are looking for and on Monday when I get in the shop I will let you know what we have here.
Neal's Fishing Products neal@nealsfishingtackle.com Sorry, only registered users may post in this forum.
|