I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

need
Posted by: Bill Cohen (---.pm3-3.phi-pt.pa.localnet.com)
Date: October 28, 2005 11:08AM

Broke the mid section of the blank RXF130 8/9 3section matte finish. Supplier is out of them.Would like to pick up just the mid section if possible if not would consider the whole blank.This is for a customer fixing is not an option.

Options: ReplyQuote
Re: need
Posted by: Billy Vivona (67.72.26.---)
Date: October 28, 2005 11:17AM

You should contact the Manufacturer direct. If it falls under the Warantee, I'm sur ehtey'll replace it. If not, I'm sure they'll need BOTH sections so they can make a new mid section so that it fits properly. I know St. Croix fits their multi-piece rods together for each blank specifically, as when I had one break they needed it back to fit it.

Options: ReplyQuote
Re: need
Posted by: Bill Cohen (---.dyn.sprint-hsd.net)
Date: October 28, 2005 09:34PM

manufacture is out of business.

Options: ReplyQuote
Re: need
Posted by: Spencer Phipps (---.lsil.com)
Date: October 29, 2005 09:32AM

Many manufacturers keep some blanks around even if discontinued for a few years to service their customers. I know Lamiglas does. Rainshadow may also but someone will pay for it if it's a Cascade blank from Mudhole. I got a replacement Cascade from Mudhole that broke in the spline finder. Did the customer have it over 90 days?

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster