SPONSORS
2024 ICRBE EXPO |
repair pricing
Posted by:
Trevor Doylend
(---.gv.shawcable.net)
Date: October 28, 2005 01:33AM
I'm wondering what the going rates (can $) are for rod repairs? Repairs like, guide replacement, cork handle repairs, and personalizing a rod. any thoghts would be appreciated. T Re: repair pricing
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: October 28, 2005 01:54AM
The last 3 issues of Rod Maker Mag. covers just about everything that has to do with Custom Rod Pricing.
Here is the short answer. "what ever the market will bear". \ Longer answer. A lot of builders charge between 5$ & 10$ plus parts cost for a guide fix or replacement. The other stuff depends on how much time & effort is involved. Would you just order a decal with the customer's name or would you weave it on? or just write with marker? Marker = cheapest or even free, Decal = 10$ +decal cost , Weave = 50$ or more. These are just examples of what some charge. Most minor repairs and embelishment I do for free 99% of the time. Raymond Adams Eventually, all things merge, and a river runs through it.. Edited 1 time(s). Last edit at 10/28/2005 01:56AM by Raymond_Adams. Re: repair pricing
Posted by:
Fred Yarmolowicz
(---.brick101.nj.comcast.net)
Date: October 28, 2005 06:23AM
I was at a popular offshore store in Maryland and if I remember correctly the labor rate was $55 an hour.Dont kown if that was actual time or flat rate though. Freddwhy (Rapt-Ryte) Re: repair pricing
Posted by:
Anonymous User
(Moderator)
Date: October 28, 2005 07:18AM
Rates by the hour are tough to figure - not everybody works at the same pace and there is no standardized rate book or chart to charge by. If you go this route, carefully consider what you'll actually be making and be sure to raise your rates as you become more profficient and are able to do more work in less time.
When I was actively involved in rod repair, I charged $5 for a repair wrap, plus the retail price of the guide. Underwraps were $1 extra, trims or inlays were .50 each. This was some 10 years ago so these rates may no longer be realistic. To put a name on a rod with dry transfer letter and cover over it with epoxy finish, was $20. ................... Re: repair pricing
Posted by:
Cliff Hall
(---.dialup.ufl.edu)
Date: October 28, 2005 04:33PM
Some Recent Related Discussion Threads worth reading:
Average Build Time? -Dave Scelfo- 08-25-04 Selling Rods Commercially -Mark Gordon- 10-21-04 Cost of guide replacement -Scott Mumford- 10-26-04 What's YOUR time worth ?? -Pete Kornegay- 10-29-04 Is this a problem? -George Thurston- 12-06-04 Rod Planning -Nick Brunetti- 10-10-04 How much to charge?: A minimum of ~ $100 above cost of parts, for the simplest custom rod for profit. Anything less is a labor of love. IMO, -Cliff Hall, Gainesville, FL-USA+++ Re: How does everyone price out a rod? Posted by: Tom Kirkman (Moderator) Date: April 18, 2005 06:02PM "This varies a great, great deal from builder to builder. I think you would want to price out the parts at full retail, and your labor should come in so that you make a minimun of $100 per rod. That could also be much, much more depending on the amount and quality of work you do. In no case should you sell for less than a comparable factory counterpart, unless this is something you're doing for a family member, etc. One last thing - the customer has no business in knowing how much of the final price is parts and how much is labor. He would not be given this information if he bought a commercially made rod and no custom builder should break down the price in that manner either. Trust me, it leads to problems." -TK Re: repair pricing
Posted by:
Anonymous User
(Moderator)
Date: October 28, 2005 09:14PM
Thanks for the additional information, Cliff. I should point out that my last bit of info there in your post relates more to rods than it does to repair. In repair work, the customer will have to know what it parts and what is labor mainly due to the fact that you only charge state sales tax on the parts, not the labor portion. On a finished rod, the sales tax is paid on the complete rod - parts and labor combined.
......... Sorry, only registered users may post in this forum.
|