SPONSORS
2024 ICRBE EXPO |
Sic guides on TCR
Posted by:
Allan Nuttridge
(---.wa.bigpond.net.au)
Date: October 13, 2005 07:58AM
I am about to build myself a 6wt TCR and would appreciate some advice on guide sizes using single leg SIC guides
Thanks Allan Re: Sic guides on TCR
Posted by:
Alan Gasior
(217.13.181.---)
Date: October 13, 2005 09:08AM
My favorite setup for 6wt's is one #12 double foot, one #10 single foot and then #6's rest to the tip. Hope this helps.
Alan Re: Sic guides on TCR
Posted by:
Scott Kinney
(198.107.16.---)
Date: October 13, 2005 02:07PM
Personally I'd use a #16, #12 double foot, and then a #8 sf followed by #7's or #6's to the tip.
The #12 stripper on a 5wt TCR I built last month just looked funny with the large diameter of the blank... Scott Kinney The Longest Cast Fly Rods [www.thelongestcast.com] Re: Sic guides on TCR
Posted by:
Adolfito Rosas
(---.201-252-185.telecom.net.ar)
Date: October 16, 2005 12:02PM
Hey Allan;
Would be great if You could post a picture of the finished TCR when you´re done, to show your work to all of us. I am personally still plannig to build one myself, actually have been planning for the last four months. Hope You build a great rod! Sorry, only registered users may post in this forum.
|