SPONSORS
2024 ICRBE EXPO |
EVA foam glue??
Posted by:
Mike Anderson
(209.64.87.---)
Date: September 23, 2005 11:46AM
What is the best way to glue EVA foam sheets or grips together? I had fair results with spray adhesive but there has to be a better way Re: EVA foam glue??
Posted by:
Billy Vivona
(4.43.114.---)
Date: September 23, 2005 12:19PM
[www.rodbuilding.org]
Do a search on Weldwood Contact Cement - this is the only stuff you should use, the REd can, not the green. Lots of info in the archives on this topic, will probably save you a lot of time using the Search Re: EVA foam glue??
Posted by:
Mike Ballard
(---.proxy.aol.com)
Date: September 24, 2005 09:13PM
You can buy it in small glass bottles. Probably the most economical way unless you make tons of these. Re: EVA foam glue??
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: September 24, 2005 09:18PM
Mike - good idea. Although the price of the bottle with teh applicator brush is like $3, the pint was $4.50 (Home Depot) - the bottle also came with a brush...but Adnaced Custom Rodbuilding suggests using a piece of scrap EVA as an applicator which is what I use. Sorry, only registered users may post in this forum.
|