SPONSORS
2024 ICRBE EXPO |
Why are spinning rod blanks so short?
Posted by:
Tim Collins
(---.sanarb01.mi.comcast.net)
Date: September 12, 2005 11:36AM
Just got back from Salmon fishing with my older brother and he had somewhat of a difficult time learning to "chuck n' duck" with a 10' fly rod from my boat. So I thought I would build him a spinning rod for next season as this may be a lot easier for him. But the majority of spinning blanks I find are in the 6'6" - 8' range and I would like to find maybe a 3 piece in a 10' blank but no luck so far.
I know some people build spinning rods on fly blanks and I may have to resort to that to get the length I want. Nick Dazer forwarded me Mudhole's sale on a Cascade 10' blank I think but that was a 12/13 wt blank and I don't think I need something quite that heavy. Wouldn't a 10' 10wt fly blank be sufficient for an easy throwing spinning rod for 15#-20# Salmon? Thanks. Re: Why are spinning rod blanks so short?
Posted by:
Anonymous User
(Moderator)
Date: September 12, 2005 12:46PM
There should be plenty of "salmon/steelhead" blanks that fit the bill for what you want. You can build them either in spinning or casting configuration equally well and most run 8' or more in length.
........... Re: Why are spinning rod blanks so short?
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: September 12, 2005 10:02PM
Hi Tim,
Check out the Batson Rainshadow model HS1021F. They are 8'6" and will handle kings easily. Also, the G.Loomis STR1025 8"6" would be a great choice but at least twice the price as the Batson. The Batson HS1021F has a 20 lb. line rating and the Loomis is 17 lb. I have casting rods made with both blanks and love both of them but I was surprised to realize I like the Rainshadow better for casting spinners for kings here on Sacramento River. Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Why are spinning rod blanks so short?
Posted by:
Spencer Phipps
(---.proxy.aol.com)
Date: September 13, 2005 01:03AM
The Dan Craft 10 ft 7 to 8 wt FT might work if your need a 4 piece blank. If storage/travel isn't in the works I'd go with the 2 piece spin/cast blanks in the length you want. The midwest guys like the 4 - 8 through 6 -10 lb blanks the most it seems. I believe Dan told me he uses a 6 wt FT for steelhead. Fished a Thorne Bros rod built on a 10 ft 7 wt Thomas & Thomas that seems to work very well years ago. Just built on the 9 ft 8 wt FT and it CCd out as a X-fast tipped 10 wt. Sorry, only registered users may post in this forum.
|