I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Nova Midi Lathe Chuck ????????
Posted by: William Bartlett (---.proxy.aol.com)
Date: September 08, 2005 10:47PM

Hi Guy's

Do any of you have a Nova Midilathe chuck? What size inserts do you use? it comes with a 50mm and that's way too big I bought the 25mm inserts when I bought the chuck but they're way too small. I need some advice here I was thinking 35mm would be just right.

Bill in WV

Options: ReplyQuote
Re: Nova Midi Lathe Chuck ????????
Posted by: Dave DeJong (---.dialup.means.net)
Date: September 09, 2005 08:26AM

Hi
I don't have that particular chuck but heres a site that you can post that question. Its a wood turners forum. Members ther are very helpful.
Dave


[wmyoung.proboards23.com]

Options: ReplyQuote
Re: Nova Midi Lathe Chuck ????????
Posted by: Curtis Beers (---.225.204.68.cfl.res.rr.com)
Date: September 10, 2005 07:25PM

35MM spigot jaws will clamp like a pit bull. I use them for turning the wood handles for my offshore rods.

Curtis

Options: ReplyQuote
Re: Nova Midi Lathe Chuck ????????
Posted by: Neil Toland (---.dsl.louisacomm.net)
Date: September 11, 2005 09:49AM

William, once you figure this out I'd sure like to know what you come up with. I'm needing the same thing but am clueless as to what to get.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster