SPONSORS
2024 ICRBE EXPO |
blank paint
Posted by:
Steve Cox
(---.client.mchsi.com)
Date: September 06, 2005 09:44AM
What type of white or light color paint should be used on the blank so that a light color thread wrap won't darken or bleed. I plan to put two coats of color preserver on the thread. Will white out work? Other thoughts?!? Thanks Steve Re: blank paint
Posted by:
Mike Barkley
(---.nap.wideopenwest.com)
Date: September 06, 2005 10:33AM
Whit out may work but test it on a scrap piece first to make sure that the finish doesn't affect it. I have used Testor's and have even masked off the area and used spray paint.
Mike Re: blank paint
Posted by:
Randy Parpart (Putter)
(---.nccray.com)
Date: September 06, 2005 02:11PM
If you do go with a white spray paint, that inexpensive Wal~Mart stuff dries really quick and covers good, too. I like working with their spray paints because they dry so fast and I have to really try hard to get it to run, too. Putter Williston, ND Sorry, only registered users may post in this forum.
|