SPONSORS
2024 ICRBE EXPO |
one piece surf rod--builder
Posted by:
bill boettcher
(---.nyc.untd.com)
Date: August 31, 2005 09:24AM
Got a guy that wants a one piece 11 1/2 FT surf rod built.
I can not fit this long puppy in my room. If any one is interested contact him --- adangelo@courts.ri.gov Rhode Island area Re: one piece surf rod--builder
Posted by:
Neal Cissel
(---.phnx.qwest.net)
Date: August 31, 2005 10:48AM
Hi Bill,
Just knock a wall out.. :-) Re: one piece surf rod--builder
Posted by:
Billy Vivona
(4.43.114.---)
Date: August 31, 2005 10:53AM
If he can wait until January, I'd do it. Re: one piece surf rod--builder
Posted by:
bill boettcher
(---.nyc.untd.com)
Date: August 31, 2005 10:57AM
Heck ?? wish I had that problem
Neal if I was that greedy-that ain't a bad idea. Don't think the landlord would like that. I would be in some one elses apartment LOL Edited 1 time(s). Last edit at 08/31/2005 11:01AM by bill boettcher. Re: one piece surf rod--builder
Posted by:
Bret Rahe
(---.ch2m.com)
Date: August 31, 2005 12:19PM
Just take over the kitchen table like I do sometimes..... Re: one piece surf rod--builder
Posted by:
bill boettcher
(---.nyc.untd.com)
Date: August 31, 2005 01:18PM
I just figured I would pass it on. Re: one piece surf rod--builder
Posted by:
Bob Barlas
(---.axsne.net)
Date: August 31, 2005 05:30PM
I can spin one that size. I have a few out in the local surf. If he is within driving distance of Rhode Island, I would be happy to speak with him. Shipping an 11.5 footer might be too costly.
Bob Barlas Re: one piece surf rod--builder
Posted by:
bill boettcher
(---.nyc.untd.com)
Date: August 31, 2005 05:38PM
Shoot him an email it is on the top post. I just wanted to try and help him out since I could not do it Sorry, only registered users may post in this forum.
|