SPONSORS
2024 ICRBE EXPO |
Finishing a blank
Posted by:
Jim Buraczewski
(---.dsl.milwwi.ameritech.net)
Date: August 29, 2005 02:05PM
I have a project comming up that will require painting a blank. I have done some experimenting with various paints and have decided to use Krylon Fussion. I am happy with the finish of the Fussion but it is apparent I will need to put some type of top coat over it both to protect it and to add some luster. Anybody have any thoughts on what I should use?
Thanks as always. Jim Re: Finishing a blank
Posted by:
Magnus Högberg
(---.bredband.comhem.se)
Date: August 29, 2005 02:27PM Re: Finishing a blank
Posted by:
david williams
(---.226.6.47.formysite.com)
Date: August 31, 2005 05:02PM
helmsman spar urathane remember to let the paint cure the full seven days or longer david williams Sorry, only registered users may post in this forum.
|