I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Finishing a blank
Posted by: Jim Buraczewski (---.dsl.milwwi.ameritech.net)
Date: August 29, 2005 02:05PM

I have a project comming up that will require painting a blank. I have done some experimenting with various paints and have decided to use Krylon Fussion. I am happy with the finish of the Fussion but it is apparent I will need to put some type of top coat over it both to protect it and to add some luster. Anybody have any thoughts on what I should use?

Thanks as always.

Jim

Options: ReplyQuote
Re: Finishing a blank
Posted by: Magnus Högberg (---.bredband.comhem.se)
Date: August 29, 2005 02:27PM

Try this ;)
[tinyurl.com]

----------------------
Magnus Högberg

Options: ReplyQuote
Re: Finishing a blank
Posted by: david williams (---.226.6.47.formysite.com)
Date: August 31, 2005 05:02PM

helmsman spar urathane remember to let the paint cure the full seven days or longer

david williams

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster