SPONSORS
2024 ICRBE EXPO |
Cork stucco
Posted by:
italo Busi
(---.44-151.net24.it)
Date: August 24, 2005 03:32PM
Hello,
I needed help !! How can I fill the cork grip ?? wath kind of material I have to use ? Thank you for give me same informations. Ciao Re: Cork stucco
Posted by:
Neal Cissel
(---.phnx.qwest.net)
Date: August 24, 2005 07:26PM
hi Italo,
Not sure what you are asking here. If the inside hole is to big for the blank then you can use a graphite bushing or cork bushings or masking take,dry wall tape will work also. Is that what you wanting to know? Neal's Fishing Products Re: Cork stucco
Posted by:
Dave Gilberg
(---.pghk.east.verizon.net)
Date: August 25, 2005 02:51AM
Italo,
If you are seeking a way to fill gaps in the surface of a cork handle that is done by mixing cork dust with Rod Bond to make a putty ... like paste. Overfill the gaps and let the filler dry completely. Then sand it down and it will blend in nicely. Make the cork dust by sanding down a cork ring of similar tone as the handle. If the handle is too dark just lightly sand the entire length and the colors should blend very well. Good luck; Dave Re: Cork stucco
Posted by:
italo Busi
(---.44-151.net24.it)
Date: August 26, 2005 03:42AM Thank you , I will try !! when done it, I will let you know the result. Ciao Sorry, only registered users may post in this forum.
|