SPONSORS
2024 ICRBE EXPO |
LS Supreme over permagloss
Posted by:
Peter Merritt
(---.client.insightBB.com)
Date: August 20, 2005 06:05PM
While we seem to be on the subject of permagloss I have a quick question. I want to cover some permagloss with LS supreme. Do I need to scuff the permagloss or wil the epoxy coat without too much trouble? The permagloss has been curing for about 24 hours. Thanks,
Peter Re: LS Supreme over permagloss
Posted by:
Anonymous User
(Moderator)
Date: August 20, 2005 08:20PM
Remember, Permagloss has a solvent in it. You do not want to cover it with something like an epocxy until you are sure that all the solvent has escaped. It's also a moisture cured polymer, so you don't want to bar humidity from reaching it until after that process is complete. So, I'd wait a few days and then lightly scuff the surface with Scotchbrite and only them apply the Supreme epoxy.
,,,,,,, Re: LS Supreme over permagloss
Posted by:
Peter Merritt
(---.client.insightBB.com)
Date: August 20, 2005 08:40PM
Thanks Tom. I'll put it back into my hot and humid garage for a couple of more days.
Peter Sorry, only registered users may post in this forum.
|