SPONSORS
2024 ICRBE EXPO |
FC High Build over FC Lite
Posted by:
Morgan Hoburg
(---.hsd1.ca.comcast.net)
Date: August 12, 2005 01:09AM
I would like to use FC Lite to saturate the threads and then top it off w/ FC High Build for good, smooth coverage. Are they compatible? If so, how long should I wait between coats?
Thanks Re: FC High Build over FC Lite
Posted by:
Fred Yarmolowicz
(---.brick101.nj.comcast.net)
Date: August 12, 2005 06:57AM
Yes they are compatable.I`ve done this several times before switching to LS Supreme.For best results do it within 24hrs.If not it will need to be scuffed with a Scoth-Brite pad and that will be difficult if its a thin coat and the threads are showing. Freddwhy (Rapt-Ryte) Re: FC High Build over FC Lite
Posted by:
Jim Upton
(---.lsanca.dsl-w.verizon.net)
Date: August 12, 2005 04:08PM
Just a thought here. You might think about using Permagloss for that first coat. It penetrates very well and the nice thing is it's dry in 2 hours. Then go ahead and use your High build over that the next day. Sorry, only registered users may post in this forum.
|