I was looking for some type of female end were you can put it at the end of a casting rod.Then i can get a balancer to screw in the end and balance the rod.If any body knows i would really like some answers if possible thank you very much

Hi,

Summermoon carry those female screw for a couple of bucks.

Naoki

HI ken
I've gotten all the parts needed , the female peice, weight disks, end peice w/ male threads, different colors, different weights, all from Merrick Tackle

Dave von Doehren
PRRODS......If man built it , man can fix it.and if man built it man can break it !

Ken,
If you don't have a wholesale account with Merrick, Summer Moon will get what you need from them for you.

I obtained one of the ballance kits from BPS. What i did was make the female end. First I put some reel grease on the male end including theads and flang, then took piece of plastic wrap form kitchen. poked small hole in plastic pushed male theads through. mixed enough epoxy to creat a 3/4" plug in the end of the rod. Put the ballancer on the end of rod pulled plastic wrap up over handle. Taped ballancer and wrap to handle stood rod in corner, to cure over night. Grease keeps epoxy from sticking to theads. plastic wrap keeps epoxy contained in rod. Once cured, you have threaded female end. Did not worry about extra wieght epoxy it was creating because I was adding wieght to end of rod anyway