SPONSORS
2024 ICRBE EXPO |
Rod eyes
Posted by:
Michael Friddle
(---.triad.res.rr.com)
Date: August 04, 2005 08:25PM
Ok i'm going to try and build a 6' 40-50# stand-up. Can anyone help me in choosing the proper eye size for this rod? I'm going to be using turbo typ guids, no rollers. The eyes must be large enough for wind on swivels to pass with ease. My thoughts were a size 16 tip following about 3-4 20's and lastly a 25.
Thanks for your help!! Re: Rod eyes
Posted by:
Jim Kastorff
(---.proxy.aol.com)
Date: August 04, 2005 08:38PM
I'm a big fan of turbo guides for standup rods even if I do prefer the 61/2' length over the 6' for improved bait casting ability and use when fishing the rail( I fish long range out of san Diego) Despite that, for a 6' rod , i'd start with a 25 if its a 50# class rod, I'd start with a size 20 turbo on a 40# class rod. If starting with the 25, I'd then go to a 20, then a 16 then the rest size 12 to a size 12 tip. Starting witha size 20, i'd go to a size 16, then a 12 , then several 10's with a 10 tip, if a size 10 tip won't fit and you have use a size 12 tip, I'd use all size 12 guides to the tip after the size 16. hope that helps. email me with any questions. Re: Rod eyes
Posted by:
Michael Friddle
(---.triad.res.rr.com)
Date: August 04, 2005 09:35PM
Thanks Jim. The size 12 seems really small for a 80-130# spro swivel to pass through?? Re: Rod eyes
Posted by:
Jim Kastorff
(---.proxy.aol.com)
Date: August 04, 2005 10:56PM
I have no idea of the size of the swivels you mention. I am curious why you would be using them on a 40-50# class rod, seems like overkill to me. Not sure I like the idea of metal swivels sliding across the sic guides either. I don't know anybody in my neck of the woods using that sort of setup. Re: Rod eyes
Posted by:
Michael Friddle
(166.82.135.---)
Date: August 05, 2005 06:48AM
Jim, I want a wind 0n swivel so that we do not have to leader the fish. This gives us more control of the fish around the boat. The Spro swivel is very small for it's size. In order for any other brand swivel to have a 80# rating it would be about twice the size of the Spro. If I bought a 30-50# swivel in a spro it would be to small to get my 80-100# leader through. If I bought another brand swivel,then again it would be twice the size and would not go through the rod guides. So the swivel that Spro makes just happens to have a larger break strength not size.
Hope all that made sence, Michael Re: Rod eyes
Posted by:
Jim Kastorff
(---.proxy.aol.com)
Date: August 05, 2005 12:17PM
Ok, but I still don't like the idea of running a metal swivel through sic guides, maybe someone else out there has done this???
If you still wish to do it, then the guide size obviously would be dicated by whats needed for the swivel to fit through. Re: Rod eyes
Posted by:
Scott Parsons
(---.dialup.mindspring.com)
Date: August 05, 2005 01:19PM
I have the same feeling with Jim why do you want to put metal on your guides. I use windon's all the time. I just put the swivel about 5 feet in front of the bait. Believe me the fish willnot associate the swivel with the bait, weather you are chunking or trolling and then that way you don't have to worry about winding the swivel onto your guides, and you still get the same effect you are looking for. Not having to leader the fish. Re: Rod eyes
Posted by:
Lynn Huffman
(24.199.174.---)
Date: August 05, 2005 02:15PM
The SPRO swivels are fairly popular on the East coast, but they're always used on rods with rollers, not ceramic ring guides. I've seen SIC rings shattered with shock leader knots. Metal swivels running across ceramic guides with a 40 pound tuna on the line sounds like a death certifcate for the ceramics. You could use loop to loop wind-ons without the swivel or switch to rollers and use the swivels. At the bare minimum, use a roller tip-top, but even with that I wouldn't give the ceramics much of a life expectancy. Sorry, only registered users may post in this forum.
|