SPONSORS
2024 ICRBE EXPO |
Another Dan Craft ?
Posted by:
Jack Goodwin
(---.caltel.com)
Date: August 02, 2005 11:15PM
I'm getting ready to order a sig V blank but was wondering about the color. it says sanded or matte clear. What one does everyone like? any +or - on either color?
Thanks Jack PS did a search but didn't find anything. Re: Another Dan Craft ?
Posted by:
Randy Parpart (Putter)
(---.propel.com)
Date: August 03, 2005 12:01AM
[www.rodbuilding.org]
Try this post, Jack. You'll have to scroll back UP to read all of them. Putter Williston, ND Edited 1 time(s). Last edit at 08/03/2005 12:03AM by Randy Parpart (Putter). Re: Another Dan Craft ?
Posted by:
Dan L Craft
(---.eugn.qwest.net)
Date: August 04, 2005 02:40AM
Jack,
E-mail me at danfisherman@earthlink.net and I will send you a picture. Dan Craft Dan Craft Enterprises Re: Another Dan Craft ?
Posted by:
Robert Widmaier
(---.sttlwa.dsl-w.verizon.net)
Date: August 04, 2005 12:27PM
As a builder of a few of Dan's blanks, I have built on both his sand matte finish and his gloss spiral finish. The difference is that the glossy spiral finish is the blank that has not been sanded smooth so it has very smal spiral rib along the blank. The matte finis is the same blank sanded so the rib is gone and the surface is matte oe not glossy. The sanded blank appears more gray in color while the unsanded blank is nore a black or darker shade of gray. The gray matte finish is much like those of other blanks with the same description. His spiral finish is a bit unique. It depends on what you like in a rod appearance. I kinda like the spiral glossy finish because it is different, but as I said, I have used both and both make nice looking finished rods.
Bob Widmaier Re: Another Dan Craft ?
Posted by:
Anonymous User
(---.cg.shawcable.net)
Date: August 05, 2005 01:38PM
Bob--Dan is in the process of dropping the spiral finish on the Sig V's and replacing it with a very nice "matte clear"--not really a gloss, not really "pebbled", just a very nice finish that really shows off the matrix of the blank. You can see a pic on our website by clicking on the Dan Craft blanks link from the home page and then the link to the image. Re: Another Dan Craft ?
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: August 25, 2005 08:30PM
test Re: Another Dan Craft ?
Posted by:
Duane Richards
(---.rn.hr.cox.net)
Date: August 25, 2005 08:31PM
test Sorry, only registered users may post in this forum.
|