SPONSORS
2024 ICRBE EXPO |
Shark Rods....
Posted by:
MaryLou VandeRiet
(---.mesh.net)
Date: July 28, 2005 04:03PM
O.K. Guys....
I need your input.....I want to go shark fishing and wanted to know, what rodblank, would you all recommend me using. And what guides do you all recommend.......and I will be both pier and surf fishing...... Many Thanks for your input........ MaryLou Re: Shark Rods....
Posted by:
Jim Upton
(---.lsanca.dsl-w.verizon.net)
Date: July 28, 2005 06:58PM
I would take a look at the Seeker Ulua blanks. I don't have a catalog here in front of me or I would give you some numbers. Re: Shark Rods....
Posted by:
Doug Moore
(---.dfw.dsl-w.verizon.net)
Date: July 28, 2005 07:00PM
Any of the turbo guides should do the trick. Regards......Doug@ TCRds Edited 1 time(s). Last edit at 07/28/2005 07:00PM by Doug Moore. Re: Shark Rods....
Posted by:
Anthony Pantuso
(---.cable.mindspring.com)
Date: July 28, 2005 07:13PM
Marylou,
Shark fishing from piers and the surf are my specialty. The rods that I use for that are 1 piece gator glass blanks. I useually take the 11' 6'' blank that mudhole sells and cut it down from the top to 10ft. The guides that I use are turbo guides, and I useually put 7 on the rod. Anyways the gator glass is truely unbreakable, and me and my fishing buddies have landed plenty of 5-6ft spinners and blacktips from the pier and suf with 30lb test and a penn squidder. Also if you want to go heavier a 4/0 Penn Senator wide with 40-50lb test works great if you can throw it. Personally I have had sharks too big to galf pierside with that set up (most recently a 10ft tiger, and 8ft bull). Good luck with that, and also if 1 piece is a problem get a two piece seeker and cut it to 10ft evenly, mudhole's got those too. Tight lines, Anthony Re: Shark Rods....
Posted by:
Shawn Moore
(82.96.100.---)
Date: July 28, 2005 07:33PM
Are you going to cast and fish with the same rod, or use a longer surf rod for an anchor rod and then fight the fish on a shorter rod that will offer you a lot more power? Re: Shark Rods....
Posted by:
MaryLouVandeRiet
(---.mesh.net)
Date: July 28, 2005 10:21PM
Hey Guys,,,,,,
Thanks so much for your input. This will be my first time to fish for shark, you guys have been a big help. I already had a idea of using the turbo guides, but just was not sure which way to go on the rodblank. Many Thanks...... MaryLou Re: Shark Rods....
Posted by:
Cliff Hall
(---.dialup.ufl.edu)
Date: July 28, 2005 10:56PM
Anybody tried the MudHole "Surf Rocket" Blanks? (page 22, 2005 Catalog):
LSBF-136-3M Fiberglass 2-pc 11'6" 4-8 lure 1.025" 12/64" 13oz $55. What type of ferrule union is this? -Thanks, -Cliff Hall- Re: Shark Rods....
Posted by:
Doug Moore
(---.dfw.dsl-w.verizon.net)
Date: July 29, 2005 08:24AM
Mary, I suppose you could set them up any direction you wanted to. I set mine with the guide legs facing the reel. Regards......Doug@ TCRds Re: Shark Rods....
Posted by:
Anonymous User
(---.proxy.aol.com)
Date: July 31, 2005 04:47PM
You may be better off with a Joss West Custom Cue. You can get one for approximately $ 1,875.00 on @#$%&. Then you can easily go to the local pool hall and hustle the nearest "shark" to your house. There ain't no piers or salt water in West Texas!
Did you use the Purple and Gold Decals I sent you? Gon Fishn Sorry, only registered users may post in this forum.
|