SPONSORS
2024 ICRBE EXPO |
Re: Nanolite vs. SiC help
Posted by:
Leland Shanks
(---.potowatami.ok.mbo.net)
Date: August 06, 2005 10:19AM
Hello;
To all fellow builders with suggestions to a problem I've currently experienced with finish coat application , the blank(s) in question are Lamiglas SB series Surf models Honey,White,or black all smooth finish blanks , when I apply finish to edge of thread wraps it wants to crawl back up on the wrap exposing a bare blank. I have contacted Lamiglas about this problem suggested solutions were to posistion rod with guides 90 degrees , and apply finish to guide foot area first then rotate & complete application. This worked to some extent still had some areas with skips , whats really baffling is the fact the BSB or spiral finish blanks turn out perfect. Also I have this occur with or without sealer NCP & regular threads, have tried 7 brands of coat , the best being clear coat from Amtak. Thanks for your input L.S. Sorry, only registered users may post in this forum.
|