SPONSORS
2024 ICRBE EXPO |
Reel seats
Posted by:
Tyler Bell
(---.sympatico.ca)
Date: July 19, 2005 11:20PM
I am new to this I need hel on how to glue all the parts together on a reel seat? can I use Epoxy or do I use something else?
Also How do I glue teh handle and reel seat on to the rod blank? If anyone can give me some in put to these questions it would be appreciated. Thank you Tyler Re: Reel seats
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: July 20, 2005 12:20AM
I use epoxy, just my preferance. Check the FAQ tab on this board as well as the library
to get more complete info. Email me and I would be glad to help. Good Luck and have FUN !! Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Reel seats
Posted by:
Randy Parpart (Putter)
(---.propel.com)
Date: July 20, 2005 12:29AM
Rod Bond; not a liquid so there's no mess cleaning an epoxy leaking out from underneath. Very easy to use. Formulated just for what you're doing. Great stuff!! Putter Williston, ND Re: Reel seats
Posted by:
Raymond Adams
(---.hsd1.ca.comcast.net)
Date: July 20, 2005 12:32AM
Hey Randy,
Where do you get your rodbond? I have thought of trying it more than a few times. Thanks, P.S. @#$%&'in marbleing photos !! Raymond Adams Eventually, all things merge, and a river runs through it.. Re: Reel seats
Posted by:
Randy Parpart (Putter)
(---.propel.com)
Date: July 20, 2005 02:25AM
Thanks!!
I get it from a non-sponsor of this site (they USED to sponsor...). I'm sure that Schneider's, Mudhole, Custom Tackle and etc. all have it, Raymond. Try it, you'll love it. On one of the last rods that I glued together, I used some epoxy just because it had been so long since I'd used it. I quickly rekindled my love for the Rod Bond. It's really some great stuff!! Anyone want to buy my leftover epoxy? I don't know which of the two main things I've gleaned from Tom's site sticks out more to me, Rod Bond or learning how to marble?? Putter Williston, ND Re: Reel seats
Posted by:
Anonymous User
(---.a.002.brs.iprimus.net.au)
Date: July 20, 2005 08:05AM
Putter, use the left over epoxy to glue Peg's cast iron skillet to the table, then sit back and watch with a couple of PBRs or you could stick Conner in one spot (if he stays still long enough) when he starts crawling. I've been considering doing it to Dakota but will need some 5min I think. Re: Reel seats
Posted by:
tom nair
(---.ptldor.dsl-w.verizon.net)
Date: July 21, 2005 12:22AM
ROD BOND, ROD BOND, ROD BOND............ Sorry, only registered users may post in this forum.
|