SPONSORS
2024 ICRBE EXPO |
Dennis Scott - dropping butt of St. Croix 4F864.4
Posted by:
Steve Kartalia
(---.155.12.248.Dial1.Baltimore1.Level3.net)
Date: July 15, 2005 02:07PM
Dennis,
I fear my e-mail response to you did not go through, possibly due to spam filtering - might want to check you spam folder or junk mail folder. Hopefully you see this. This is my best educated guess at what will happen. CCS will tell you exactly what will happen. Steve First, I think you are on the right track. That rod probably CC'd at 5.5/67 or so in full-length version and I would guess it would come in around 3.8/62 or thereabouts in the 3/4 length version. Do you know how to measure the blank with the Common Cents System? If not, I would recommend getting the information and doing that. Or, I would be happy to test the blank for you and send it back as long as you cover shipping in both directions. Figure $10 ($5 each way) and you will know exactly how powerful the rod is and what it's action is. I would guess that instead of the rod being a good 4/5wt. it will be a good 3/4 wt. and with a slower action than the full length version. Let me know if I can help. Steve sdkxc88@wakeforestsports.com --- Dennis Scott <[email protected]> wrote: Hi Steve, It seems you have done alot of flyrods by dropping the butt section.... Well purely by boo-boo; I will be building my first one. The rod is a St.Croix IV 4pc 8'6" 4wt. fly rod. Could you give me some insight on what wt. rod this is without the butt section? With the butt section it cast a 5wt line pretty well, but I think it would have functioned better with a 4wt line. I'm thinking w/o the butt section this will be a 3wt rod. What do you think? Your insight is appreciated, Dennis Scott Re: Dennis Scott - dropping butt of St. Croix 4F864.4
Posted by:
Dennis Scott
(---.dhcp.rdng.ca.charter.com)
Date: July 17, 2005 07:00PM
Thanks for information Steve.
Dennis Sorry, only registered users may post in this forum.
|