SPONSORS
2024 ICRBE EXPO |
Which is first????
Posted by:
Dick Laxton
(---.houston.res.rr.com)
Date: July 13, 2005 05:39PM
I am going to completly re coat a rod with an aerosol Epoxy Spray as well as doing new eye guides with Flex Coat.
Question is which to do first the Epoxy or the Flex Coat and guides? Re: Which is first????
Posted by:
Anonymous User
(Moderator)
Date: July 13, 2005 05:53PM
If it were me, I'd strip the rod, clean it up and refinish the blank itself. Then after making sure the surface coating is completely dry/cured, I'd wrap the guides and finish those wraps.
................ Re: Which is first????
Posted by:
bill boettcher
(---.250.171.226.Dial1.Weehawken1.Level3.net)
Date: July 13, 2005 06:44PM
You probably are ---you just don't know it yet Re: Which is first????
Posted by:
Ralph D. Jones
(---.dialup.mindspring.com)
Date: July 13, 2005 07:20PM
Dick, listen to Tom, Just do one step at a time. Then the next step... Before long you'll have the finished beauty (I hope) in your hands, ready to fish. Try to take shortcuts or get ahead of yourself and you'll make a mess. I speak from experience. Welcome to the addiction. LOL Ralph If at first you don't succeed, go fishing, then try, try again. Re: Which is first????
Posted by:
Dick Laxton
(---.houston.res.rr.com)
Date: July 14, 2005 04:25AM
I am going to do just that and in that sequence, hope it works out to my satisfaction
DL Sorry, only registered users may post in this forum.
|