SPONSORS
2024 ICRBE EXPO |
I need to match a G Loomis stripping guide
Posted by:
Dick Conway
(---.222.252.64.snet.net)
Date: July 11, 2005 05:36AM
I need to replace the smallest stripping guide on a G Loomis 9' #10 fly rod. The rod has three strippers and the insert on the one closest to the ferrule is gone. The guides have a titantum looking finish. Does anyone know what guide Loomis uses and where I can get one. Thanks Re: I need to match a G Loomis stripping guide
Posted by:
Dick Conway
(---.liberty-bank.com)
Date: July 11, 2005 07:14AM
Sorry, the rod is a GLX Re: I need to match a G Loomis stripping guide
Posted by:
Spencer Phipps
(---.hsd1.wa.comcast.net)
Date: July 11, 2005 10:17AM
Titanium Fuji. Re: I need to match a G Loomis stripping guide
Posted by:
Michael Sledden
(---.dsl.emhril.ameritech.net)
Date: July 11, 2005 10:33AM
You can also get in touch with Loomis and tell them the rod you have, they will send you the guide you need. Re: I need to match a G Loomis stripping guide
Posted by:
Robert crabtree
(---.proxy.aol.com)
Date: July 11, 2005 10:40AM
if its a factory g.loomis i would send it in if you correct the problem on a factory rod it will void the warranty later. loomis has a good turn around time just a suggestion though.. Sorry, only registered users may post in this forum.
|